mr-ace-k
-
Posts
26 -
Joined
-
Last visited
Content Type
Profiles
Forums
Gallery
Events
Articles
Media Demo
S30z Register
Store
Everything posted by mr-ace-k
-
Price Drop: Triple Dhla 40G Dellorto Carburettor
mr-ace-k replied to mr-ace-k's topic in Parts and Tools for Sale
BUMP: Price drop $800 have no need for these now -
PM sent re: centre console
-
Price Drop: Triple Dhla 40G Dellorto Carburettor
mr-ace-k posted a topic in Parts and Tools for Sale
Triple DHLA 40G Dellorto carburettors. Was running on my 240z L24 until only recently. Parting out and garage clean out. Comes with ram tubes, weber mesh filters and a used (but in good condition) seal kit with all rubber mounts and bolts. Jets are as follows from what I've inspected: Main Emulsion Tube 7772- 10 Main Jet 135 Matching serial numbers as shown in the images. $800 Could do with some new gaskets on bottom of two of them as have very slight leak. Message me here or d.mracek81@gmail.com or 0419 008 705 Cheers Located in Melbourne South Suburbs
-
Hey Guys I have a set of 4 260z wheels with tyres in good condition. Did a search but couldn't find much, anyone know roughly what sort of price sell them for these days? Rims are in reasonable condition also with slight gutter rash Thanks
-
I also have a set of 4 in Vic if still looking
-
Great day had a blast. Few pics from me :-) https://mr-ace-kproductions.smugmug.com/Events-Car-Shows/Melbourne-Datsun-Day/
-
Got rears just chasing 240z fronts but thanks anyway mate
-
Hey Z, Do you have any front 240z struts? Cheers
-
thanks will do
-
Hi Guys. Looking for 240z front struts if anyone has them. Located in Melb but willing to pay for shipping if interstate. Cheers. (Yes I've tried z-shop and 2 wreckers)
-
240Z & 260Z Wheel/Tyre Options, Offset, Backspace
mr-ace-k replied to Toecutter's topic in Wheels and Tyres
Hi guys Looking at purchasing 15x8 (0) and 15x8.5 (+4) for 1971 240z. I'm pretty sure the fronts at 8.0 will fit but would a 8.5" fit with stock guards and slightly lower (think they are Eibach) springs? Thanks. Edit: Well no one answered and the answer is yes the above specs fit with slight poke in the rear. Planning T3 coils and adjustable arms in coming months see how we go! -
PM sent
-
All fixed. The inside door handle connecting rod was pulled to tight therefore the mechanism wouldn't allow any travel of the door lock to the lock position.
-
Hey Guys Would a 260z (passenger side) door lock mechanism fit a 240z (drivers side)? Trying to suss out options to repair mine that has broken internal parts which has caused the drivers side lock to stay in the unlocked position. Cheers Dale
-
Thanks mate. Will do some more looking around and get locksmith to have closer look if can be repaired.
-
Thanks Alan, I'll suss it out if it will fit
-
I'll try mate, but the actual spring in the door is broken. I've had an auto locksmith look at it as well as the guy installing my alarm have both confirmed its broken and needs to be replaced for it to work.
-
Chasing a door lock mechanism as my drivers side does not lock. 1971 Datsun 240z The spring that locks/releases the connecting rod to the door knob is broken and stuck in the unlock position. I've tried the usual online places such as MSA, vintagezparts, black dragon, Moorabbin Auto Spares and eBay but come up empty handed. I've attached an image for reference.
-
Thank you! Helps when you are Treasurer of a registered club :-)
-
Thanks everyone. It passed RWC last week and is now on Club Permit. As stated, yes you can drive on club permit plate anytime, but it's limited use. You must record all drives in a log book and if pulled over and its not entered you either loose the permit or heavily fined. All eligible clubs are listed on the Vic Roads website. She's been a blast to drive so far. Needs a good tune as running super rich. Hope to meet some of you at an event sometime soon in Melbourne when the weather is kinder.
-
Yes it is his car that I've purchased :-) Very happy with it. Hopefully road worthy this week and then club plates and drive it!!!
-
Well as posted last month I was on the hunt for a 240z. Al helped me search and up popped one which after an inspection and a drive I immediately placed a deposit on and picked up yesterday afternoon! I'm over the moon and can't thank Al enough for helping me find one and to the previous owner for making the transaction so easy! Spec: 1971 Datsun 240z, L24, Dellorto triples, flat top pistons, bigger cam list goes on. Some of you may recognize it I'm sure. Hopefully get roadworthy done this week, then club plates whaoooooo can't wait!
-
Thanks Al!!! Appreciate the kind words. I'll continue looking until I get my z! Look forward to the adventure :-)
-
^^^ Yep that's my photography stuff. Thanks for sharing it! Your sister has become a very good driver! It's great to see some girls out there battling it with the lads.
-
Hi Guys thanks for the advice and comments. I'm looking at something around the 20-25k mark at this stage. I know I have to be quick I've seen how fast some of them go!
