Stivva
-
Posts
992 -
Joined
-
Last visited
Content Type
Profiles
Forums
Gallery
Events
Articles
Media Demo
S30z Register
Store
Everything posted by Stivva
-
I require the red switch in the centre of the centre console and the chrome strips that run along the profile of the roof. Care to separate? -
I think for the time being I just need the original disc size type. I will ask Pauly Adams.
-
I destroyed my suspension.... Currently on the lookout for parts to build new coil overs.
-
Unfortunately, no model number as I am just ebaying.
-
What did you type?
-
I have been looking for a factory radio as per my wanted AD, but have come across some 1600 radios. I know the faceplate is different (and replaceable) but can I use a 1600 radio? Are these the same or similar enough to pass? What other options are out there?
-
Thanks mate, but I have new badges all round and am just missing the Nissan badge.
-
I am looking at ordering some steel rims from Full lock motorsport, but to do this size they need a minimum of 20 wheels ordered. So, as always, I am put out an EOI to see if the crew here would want any wheels? First we would need to decide if we are having 15 or 16" diameter. So, we need 5 people, myself included to be interested. These wheels would warrant flares. They will be about $120 a wheel and they look something like this, but will have much more dish. Anyone keen?
-
The nissan badge I am after looks like the one in this photo If you could link me to the location on yahoo japan, that would be sweet, there are about 100 pages of s30z items
-
https://www.thezstore.com I believe I found the dash badge here, just hoping they will ship it too me. I have just placed the order, but I am having no luck with the nissan badge.
-
Hey guys, I have been rebadging my car with all new badges and I need two more to complete the image. I need a Fairlady Z badge for the dash, and the only one I can find doesn't post to Australia. I also need a a 70's era Nissan badge. The one I am chasing is a rectangle badge with Nissan embossed in it with (I think) horizontal lines both on top and below the word Nissan. I hope I get them them both new, so if you guys can point me in the direction of these two badges, that would be sweet.
-
Looking good thus far, make sure you keep us updated on it this time. Also, I would like to know more about these 5 stud adapters
-
Make sure you put new side repeaters on and not the old ones! http://www.ebay.com.au/itm/DATSUN-NISSAN-240Z-260Z-FAIRLADY-FENDER-INDICATORS-/130663754043?pt=AU_Car_Parts_Accessories&hash=item1e6c2aa93b#ht_3205wt_1024 clear is there too
-
Yeah, I am going to stick with the side mirrors, I like them, they are different.
-
10" wide -40 offset will fit all round with no problems and a little poke, what if we aimed for them?
-
from the below http://www.facebook.com/Option1Garage?ref=ts
-
Actually, if we can get enough people to buy them (5 people) we can actually custom order them in Australia for the same price from Queensland. There is mob there that will do them in whatever size you want, and offset, but you need to order a minimum of 20 wheels
-
Buy a hatch from the states and pay the freight, it will cost you the same by the time you reproduce a replica. Or source one from Otomoto as they can access Japanese fibreglass parts
-
$90 a wheel plus unknown postage, enquiry has been sent. I need them from the states, because no one here offers massive negative offsets unless I pay $400 a wheel for custom make. Australia fails again.
-
15" and they are from the States. I want 15x12 on the rear and 15x10 up front
-
I have 9" -10 with 38mm spacers, what is equivalent?
-
Photos of this coupe are definitely required!
-
Thats about right, I had calculated -25 though, is that also good?
-
Oh and this!
-
So, I need to purchase a new Fairlady Z badge for the bobtail spoiler which has been reinstalled. Is it the same badge as the one on the fenders? Or is it a different (size) one? Also I am looking a purchasing some new rims, and I wanted to know will 12" wide rims fit on the rear under ZG flares?
