Jump to content

ozy

Members
  • Posts

    171
  • Joined

  • Last visited

Everything posted by ozy

  1. actually folks, is it that big a pain in the arse to replace all the wiring? reason being, while everything works fine, i cant help but think that it could be better. 1) when indicating, my rear lights dim a touch (its so minor a normal person wouldnt notice) 2) my instruments are still dimmer than satisfactory 3) things arent uniform in wire colour (where new things were spliced) or even where earths are located (like my headlights, right earth was at the rear of the light, left earth was inside the engine bay) 4) my engine bay has wires stopping here and there and it all seems disorganised (this annoys me the most) these annoy me. ideas? what have the rest of you done?
  2. wish i lived in oz so i could come to this gigidy gigidy goo http://s42.photobucket.com/albums/e338/w810sc/classic%20JDM%20cruise/
  3. @dazzed: that wiring diagram is one i found on the net, its exactly as is already in the car. i think ill replace it, no colours match the nissan system and even wires of colour A leaving the relay switch, turn to colour B 2 feet later after and its untidy so its really pissing me off. alternator to starter motor wire? now this is a guess, but is this to give the starter more juice as soon as you start turning the engine? thats very clever. and yes, im a novice!
  4. finally looked at the main bulbs... looks like my troubling left light has been attacked before, solder! right bulb rear left bulb rear will try to get a replacement tomorrow
  5. @zedman: mines a 78 japanese fairlady z that originally had a 2000cc but has had work done on her and she now has a L28. I read an earlier post on fusible links, so i checked them. they looked ok, and there was a little corrosion, but thats cleaned now and i think my dashboard is a little brighter now! @zeddophile: will check out power at every point and finish checking fuses beside steering and the light stalk switch too. ill report back later. I just wanted to ensure that my wire diagram was right, but its hard to check properly because whoever did my wiring used the same colours everywhere. pain in the arse to follow
  6. ive an earth problem too i think. it manifests when i hit a pothole by killing radio, revs, fuel guage. cool, fuses fuses fuses! if not, ive a multimeter laying about here somewhere. p.s. is that diagram ok for the light wiring?
  7. hey there, ive finally started looking at my Zed, and in particular, the annoying light situation. originally, If i wanted dims, i got dims. if i put on the full beam, id lose 1 dim and get 1 full beam. so today i chased the wires and cleaned any connections (except the actual headlight, fuseboard and lightswitch area, i know im very bold) but i want to see if this diagram is correct for a generic light setupl. i believe these are the same. as terminals 85 and 86 do not care about polarity (see pics) my wiring is like this, but now parker = front indicators "on" (like foglights) dims = ok full beams = nothing ideas? or should i get off my arse and continue cleaning the points or would you recomend new relay switches / wiring?
  8. ozy

    Powerplant options

    fully out should climb to 3500? mine deffo doesnt go anywhere near that. i normally assist the revs up to 3000 myself till im happy shes warm enough.
  9. ozy

    Powerplant options

    oh i dont know, just popped into my head, maybe the choke cable is snagging of the throttle cable to such an extent that it revs the engine exactly to 4500 revs. i doubt it, just throwing out the whole, could be something simple answer. is it still revving too high? only does it when the choke is on? you live in queensland? do you need the choke? my Zed is in ireland, 20 is a hot day, i dont really need the choke over 5 degrees celsius, 13C is still warm here, mad
  10. ozy

    Powerplant options

    maybe your cables are crossed?
  11. http://www.youtube.com/watch?v=w7ABvpcexe4&feature=PlayList&p=430FACD2D9ECD973&playnext=1&playnext_from=PL&index=22 bruce almightym, 2+2
  12. ozy

    Powerplant options

    my L28 is recently reconditioned and as i only drive it at weekends, i dont keep track off fuel economy. but my initial feeling is that its not too unlike my old sr20det (turbo s15). so m happy BUT if the engine was to blow up, my excuse for an RB engine would have finally come about, that would be nice, but i fear that it wouldnt make the same noise as my lovely carbie L28. ah no, carbie engine all the way, as above, fuel economy and expense of conversion....feck that
  13. i cant remember where i saw it, but there was this white rockyauto car, either a skyline or 240z and it looked perfect, but go underneath it where the metal work returns (i seriously do not have the right lingo) and instead of it being just a turn in the metal work, there was a half inch of bondo / filler or god knows what... ill have a look for that pic
  14. damn awkward yanks but they are a great source for bits and pieces that are lhd / rhd proof. must order some bits tonight... better make sure she isnt looking
  15. bought my Z in japan, not cheap, but rather that than buy a barnyard irish or uk job. i see the prices on this site and it amazes me how cheap they are sometimes. maybe its because you have loads in oz, dunno, fair play!
  16. okay okay, you need to get in touch with panel beaters... then some punk-ass-kid beaters
  17. much sense this man to me speaks
  18. to put a slant on the "how dare they do this to someones car" how about, how could thy do this to a thing of such beauty, that is being kept and maintained (at the owners expense) for posterity and the good of the classic car community. however much i fail to understand vandalism of any description, i just cannot bring myself to see what could be gained in attacking a majestic lady like a zed? kuntz
  19. feeling ok about a head on impact at 30
  20. ive looked a few times on the net, but nothing satisfying. i feel that the doors look a little miserable, wouldnt fancy another side crash in a nissan.
  21. i was just looking around the net and couldnt find any info on crash tests for early zeds. i know that these things werent as common as today where folks brag about their safety features, but maybe, there is something somewhere... id just like to see how a zed fails or does anyone have crash pics or is this all a little too depressing for my fellow Zedheads?
  22. yeah, theyre a bit big. i think that would be a good compromise, but i havent come across anything like that on the net yet. would be nice to see
  23. theres a famous z in texas and that guy made wide metal flares, i used to love them, i still like them... ill find a picture
  24. hey man, come to the dark side, i love the bolt on flares. i remember the 1st time i came across this thing was on an rx7 bodykit. i couldnt understand why the bolt on look would be trendy, but the jap kids loved it. then i grew to like it. eventually, when it came time to buy my own zed, i had to go for the flares! mine are grey, would look better black though, may get the airfix paint out (ha, i make joke)
  25. @doctor z are you taking inspiration from datsun-jays 2+2 in ireland? ive seen her in person and shes damn near perfect!
×
×
  • Create New...