JDM-TOY Posted June 5, 2018 Posted June 5, 2018 Hey guys Selling my R180 diff I believe its a 3 5 ratio, It came out of my auto 240z. Not sure why but when you spin the flange both sides spin, but its not a LSD. Can anyone shed some light on this. $500 pick up from Sydney Hills District Quote
Cozza Posted June 5, 2018 Posted June 5, 2018 (edited) Do they both spin in the same direction? That is the question. Edit: When spinning one of the output shafts. Edited June 5, 2018 by Cozza JDM-TOY 1 Quote
Gtv240z Posted June 5, 2018 Posted June 5, 2018 They can do that but if you grab 1 output shaft while turning input the fixed shaft will stay stationary while the free one rotate... You ll need three hands! Unless it has been welded! Quote
JDM-TOY Posted June 6, 2018 Author Posted June 6, 2018 They can do that but if you grab 1 output shaft while turning input the fixed shaft will stay stationary while the free one rotate... You ll need three hands! Unless it has been welded! Hey CraigZ thats what I did and only one side was spinning. Quote
Moderators PB260Z Posted June 8, 2018 Moderators Posted June 8, 2018 Just pop the rear cover off and have a look, that will tell you plenty Open, LSD or Welded Ratio Cheers Gtv240z 1 Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.