Wanted: Rear Louver 260Z 2+2

[BNE]

Finally have my first z and I am now looking to get in on the road and get that 70's look.

 

Want a Rear Louver for a 260z 2+2 in good condition.

[Lynton]

I have one of these tucked away in the roof I will load photo on weekend I recall they are pretty hard to insert under rubber between glass you may need a special tool?

[BNE]

Thanks - yeah I have heard they are hard

 

But I love the look

[GregTas]

I had one on a 260 and the mounting was quite simple. It had metal z plates for mounting. One end of the clip went between the glass and rubber and the other end sat out above the glass. The louvre just attached to the metal clip with rivets or screws. This is the way they used to attach.

 

 

[gav240z]

I think the clips are the hard part to find these days...

[GregTas]

I was wrong. Mine had z clips but I found these and I recall now that they were mounted with these.

 

Mounts that just stick on the window $40 for a set on ebay.

 

http://www.ebay.com.au/itm/Aunger-Louvre-Fitting-Kit-Rear-Louvre-Mounting-Clips-/142500091426?hash=item212daad622:g:tY4AAOSwqfNXnCUH

 

Now a 30 year old plastic louvre for a less than common car that's still in one piece, that will be a challenge.

[locklock]

Mine is similar to getras, mounted to an aluminium frame between the rear glass. The lourve is made of aluminum not plastic.

Dont mind selling but im too far away in Malaysia.

Edited September 15, 2017 by locklock

[gav240z]

Don't think it will fit a 2+2 but here is a 240z 1.

https://www.trademe.co.nz/a.aspx?id=1419363662&member_hash=7c982e0bdc2fcbd8c2c27bdf1cc436f59983e2800dd44aad89&tm=email&et=46&mt=7F1F0D31-C106-4483-BC9A-C7464ADF110F

[gilltech]

That NZ TradeMe one is the plastic variety, lots of early Zeds in NZ had them, several different types some fixed but I saw one type that was hinged for window cleaning, again some were better than others at not blocking so much rearward view. I can't decide if I like them or not, but I like the look of Locklock's aluminium one better, looks fabricated not plastic moulded.

[Lynton]

[BNE]

image.jpeg image.jpeg image.jpeg image.jpeg

Looks good it fits the 2+2?

[Lynton]

yes for 2+2 model

[Lynton]

I am in Brisbane all this week will let you know some details on weekend will try to find out cost of shipping as well will come back to you sorry for delay Lynton

[BNE]

Thanks - much appreciated

[BNE]

Got one off gumtree

[Brabham]

Lynton I would be interested if the other guy passes. Send me a PM.

 

Cheers