Wtb 240Z Parts

[bbqjackson]

Hello,

I'm after the following; for a 1971 240z 

 

**updated 13/03**

 

Must be in good condition or reconditioned.

 

* Front grill
* Interior panels - need most pieces (mine are either damaged or faded)

* Center console 

* Dashboard (might try my hand at sanding and redoing if nothing turns up)

* Seats 

* Airdam type 1 with or without brake ducts.

 

NSW preferred / Please send me a pm with your price and condition

if your happy to ship interstate then drop me a line / Also paypal much preferred.

Thanks for viewing

Edited March 13, 2016 by bbqjackson

[gav240z]

Seats, Console and Gauges can be year dependent. What year are you after?

 

Does your car not have any of these or are you looking for already refurbished items to replace the worn out items with?

[bbqjackson]

car has these items but the dash has about 4 big cracks and is quite faded. seats are worn and id say had been re trimmed (cloth) sometime ago.

Edited February 15, 2016 by bbqjackson

[gav240z]

You can purchase kits to reupholster the seats in original trim, the dashboard can be re-skinned.

 

Have a read of this.

http://www.viczcar.com/forum/topic/14326-dash-reskin-diy/

[PB260Z]

Gidday

 

Assuming you found a car ?

Post up some details ?

Starting a build thread ?

 

One more for the Sydney crew

 

Cheers

 

PB

Edited February 15, 2016 by PB260Z

[bbqjackson]

You can purchase kits to reupholster the seats in original trim, the dashboard can be re-skinned.

 

Have a read of this.

http://www.viczcar.com/forum/topic/14326-dash-reskin-diy/

 

thanks for that gav, definitely something worth looking into.

 

 

Gidday

 

Assuming you found a car ?

Post up some details ?

Starting a build thread ?

 

One more for the Sydney crew

 

Cheers

 

PB

 

it goes without saying, when it rains it pours. a handful came up, even one running an rb26/30 combo but felt it was just too much car for me. 

 

Ill throw up some details shortly, its currently sitting in pieces and i figured while everything is yet to be put back together. ill source some second hand parts.

 

Looks like ill keep it relatively standard but once i get started ill start a thread.

[PB260Z]

it goes without saying, when it rains it pours. a handful came up, even one running an rb26/30 combo but felt it was just too much car for me. 

 

Ill throw up some details shortly, its currently sitting in pieces and i figured while everything is yet to be put back together. ill source some second hand parts.

 

Looks like ill keep it relatively standard but once i get started ill start a thread.

Looking forward to reading that.

[MichaelT]

thanks for that gav, definitely something worth looking into.

 

 

 

it goes without saying, when it rains it pours. a handful came up, even one running an rb26/30 combo but felt it was just too much car for me. 

 

Ill throw up some details shortly, its currently sitting in pieces and i figured while everything is yet to be put back together. ill source some second hand parts.

 

Looks like ill keep it relatively standard but once i get started ill start a thread.

 

Enjoy your new purchase!

What colour is it?

[Raysax]

Hi, I've just sold my restored 240z and am looking to clear out my shed of all my spare parts. Have all the parts you have listed except the seats. Also have spare front end parts, some rubbers, trim, front end guards and rear hatch plus heaps more. Would prefer to sell as a bulk lot.

 

[bbqjackson]

Enjoy your new purchase!

What colour is it?

 

Cheers Michael, It is orange

[MichaelT]

When are pics going up? I'll be keen to see how it goes.

[bbqjackson]

When are pics going up? I'll be keen to see how it goes.

 

I'll try upload some tomorrow, i don't have any as it sits (only when i first purchased).

 

It passed blue slip last Thursday but on the test drive; the rear left brake failed and spat oil everywhere. As luck would have it; after the test drive a bad welch (welsh) plug caused a massive coolant leak. We are into week 4 of it being put back together. The motor kicked first go but no telling how long she was sitting for. This week the shocks, struts and springs getting replaced.

 

Unfortunately, i have to pay someone to put her back together but hoping to try my hand at restoring the dash board.

 

Hopefully it will be ready for the drive this weekend

Edited March 13, 2016 by bbqjackson

[ilbert]

Hi, if you're looking for the airdam are you getting rid of the stock valance body parts, if so I'm after these. Not sure what air dam I've got, might be able to swap, who knows?