aircobra Posted April 12, 2015 Posted April 12, 2015 in the progress of rebuilding my calipers and have split them apart, but can't remove the pistons i just want to get them out to have a look at the condition of the bores to see if they're worth rebuilding does anyone know how to get them out? compressed air does not do the trick for me or maybe recommend a good place in south that can do it for me Quote
Linton Posted April 12, 2015 Posted April 12, 2015 if air wont push them out you might have to put them back together and hook up, put a piece of wood between them and pump the pedal, if they are not seized put back together and us air again good luck! and watch your fingers Quote
smugley Posted April 13, 2015 Posted April 13, 2015 Use a grease gun ! The thread is the same as the caliper and is much safer than using compressed air . Its a bit messy but it's what the pro's use . Cheers Doug Quote
Administrators gav240z Posted April 13, 2015 Administrators Posted April 13, 2015 Wear eye protection also, brake fluid in eyes not good. Quote
44014 Posted April 13, 2015 Posted April 13, 2015 Wear eye protection also, brake fluid in eyes not good. WHS Gav on the scene! we want to see a hard hat,safety vest and a harness if standing up... Quote
Administrators gav240z Posted April 13, 2015 Administrators Posted April 13, 2015 WHS Gav on the scene! we want to see a hard hat,safety vest and a harness if standing up... I like my eyes my mother gave them to me. https://youtu.be/0nFxZipsiOM?t=49m38s Quote
aircobra Posted April 15, 2015 Author Posted April 15, 2015 all sorted better brakes in breaside removed them for me, they have a hydraulic pump at the shop damage is 4x pistons @19 each, 2x seal kits @14 each and 2 bleed nipples all i need to work out if to sandblast the caliper or just degrease the rotors are 12mm and rusty, so I figure that if I get them skimmed, I loose .5 and I will be within .5 limit. i think 11mm is min thickness any sources for cheap rotors? Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.