aircobra Posted August 14, 2017 Author Posted August 14, 2017 grill assembled and mounted seatbelts in ( thanks luke240 for the HEMCO tip on the belts) just waiting for carpets from rob at z factory and have been for 3 months., keeps on saying any day now electrics finished, had to disassemble and clean up the light switch, but the relays are now all good. now i know that the 2x relays on the sides are - they are for the high beam flasher at the end of the stalk. just waiting on a door dovetail from warren z to line up the drivers door PeterAllen 1 Quote
aircobra Posted August 19, 2017 Author Posted August 19, 2017 got the dovertail, but when assembling the lock realised that my homemade "from bunnings" spring was too weak to hold the door button rod so i had to make up a couple of nifty coil springs. i'll put up a quick tutorial in the interior section when i went for a quick spin around the block, the gearbox diagnosis was confirmed - it grumbles and whines throughout all the gear, so the current suspect is the main input bearing. waiting on prices from warren potter for a bearing set and looks like this sunday will be spend pulling out the box bummer since i had everything out, but on the other had, could not have known that the box was bad prior since you could only diagnose this one the car is mobile Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.