evolutionise Posted November 22, 2013 Posted November 22, 2013 Hi Guys, I'm after the front rod from the handbrake for a 240z. I believe the one which i have is from a 260z, which seems to be longer. If anyone's got one, please let me know. Thanks Sam Quote
Scoota G Posted November 22, 2013 Posted November 22, 2013 You may have a 2+2 one. Perhaps measure it and i can tell you what it came from. Quote
evolutionise Posted November 22, 2013 Author Posted November 22, 2013 You may have a 2+2 one. Perhaps measure it and i can tell you what it came from. Just measured it... its about 57cm tip to tip. I'm sure that this would be from a 2+2.... Quote
zeds4ever Posted November 24, 2013 Posted November 24, 2013 Think I've got a 260Z unit among'st my stuff you can have if it's any good to you. Regards: Alan. Quote
evolutionise Posted November 24, 2013 Author Posted November 24, 2013 Think I've got a 260Z unit among'st my stuff you can have if it's any good to you. Regards: Alan. Hi Alan, Is the front rod you have shorter than 57cm and from a two seater? If so, I'm deffinately interested. Cheers Sam Quote
zeds4ever Posted November 25, 2013 Posted November 25, 2013 G'day Sam, the rod I have is from a 2 seater, if it's the rod that extends from h/brake actuating lever that has a adjustment block on the end measuring 26 cntmtrs in total lngth ,also there is a rod which screws into this for adjustment purposes which is 15 cntmtrs in lngth.Overall msrmnt is 40 cntmtrs when put together with the width of rod being aprox 5 ml in dmtr. Your in luck. Cost will be pstge plus donation to Forum site Regards: Alan. Quote
cruzer Posted November 25, 2013 Posted November 25, 2013 G'day Sam, the rod I have is from a 2 seater, if it's the rod that extends from h/brake actuating lever that has a adjustment block on the end measuring 26 cntmtrs in total lngth ,also there is a rod which screws into this for adjustment purposes which is 15 cntmtrs in lngth.Overall msrmnt is 40 cntmtrs when put together with the width of rod being aprox 5 ml in dmtr. Your in luck. Cost will be pstge plus donation to Forum site Regards: Alan. Hi Alan, That sounds about right.... Let me know the cost & donation amount to the site and I'll send it right away.... Cheers, Sam Quote
zeds4ever Posted November 25, 2013 Posted November 25, 2013 Whats your address mate to check pstge cost, etc. Ten bucks or so to site. Curious to know why you posted WTB under another members title. Regards: Alan. Quote
evolutionise Posted November 25, 2013 Author Posted November 25, 2013 Hmmm good pick. I didn't even notice. I forgot my old account I created n had to crate a new one. But guess my laptop remembered my old account info. Anyways, my postcode is 3805. Quote
zeds4ever Posted November 27, 2013 Posted November 27, 2013 Gday Sam , posted parts this morning. Regards: Alan. Quote
PeterAllen Posted November 27, 2013 Posted November 27, 2013 Off topic, but Alan I trust you got through the fires okay? Quote
zeds4ever Posted November 27, 2013 Posted November 27, 2013 Yes thanks Peter, but it was all around our place & had me pretty worried. Kept my Zed covered with wet woolen blankets to keep her from harm. Don't know how many hrs I spent on the roof with hoses at the ready for embers. Regards: Alan Quote
evolutionise Posted November 27, 2013 Author Posted November 27, 2013 Gday Sam , posted parts this morning. Regards: Alan. Thanks Alan. Much appreciate it Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.