cruzer

I'll sus it out. I quite like the Antitheft system by a PIN feature 123 has Supposedly, these things are made in the Netherlands, but that could all be just marketing hahaha

If anyone has 123 Ignition TUNE+-6-R-V-DATSUN, please let me know

Hi all, I'm looking for an airbox for a 240z carbs. If anyone has a spare one they are willing to part with (melb pref.), let me know. TIA

Hi Peter, I might take you on that offer as my car doesn't have one at all. Hopefully I can get this rekey'd. DM'd you

does anyone have a 240z/260z rear boot lock barrel with Key? It the push down lock on the boot lit

PM'd I have one, but its leaking. Did a simple leak test at home with the garden tap turned all the way down and still leaked. I might try the radiator shop as well as they are cleaning out my fuel tank at the moment

Hi, Does anyone have a good non-leaking 260z heater core (2 seater if it makes any difference) that they are willing to part with?

Thanks, I'll give them a try

Hi All, Has anyone replaced any of the HVAC hoses behind the dash and know where I can buy these?

Thank Jeff. I'll poke around the wiring loom and figure it out. My thinking is you need to stop the fuel flow in a event of an accident. Last thing you want the car to do is catch on fire! I've looked into inertia switches as well, and apparently the Ford BF Falcon has these on the passenger footwell somewhere. I'll check out my local wrecking yard and see what I can find.

Thanks Jeff, These pics will help loads! how do you wire this so that the pump turns on and stays on with ignition in position 1? I found this article which answers most of my questions except the one above https://www.classiczcars.com/forums/topic/45486-240z-electric-fuel-pump-installation/

Thanks Jason/Locky, I'll look at purchasing that pump then. just have to figure out how to keep this pump running quite now hahaha

Hi Roady, Where is your fuel pump mounted? Are you running SU's or webber's? Are you also running a FPR?

Hi all, I will be putting in a L28 into my 260z. As the L28's don't come with the eccentric cup washer that mounts on the front of the cam gear to operate the mechanical fuel pump, I can't install the mechanical fuel pump. So my next option is to get an electric fuel pump. What fuel pump is everyone using? Any of them quite while in operation? I'm guessing I need a max of 3-4 psi to keep it going.

Hi Guru's I'm trying to figure out what the difference is between the 280zx L28 vs Patrol L28. From random bits of information I can gather: 280zx F54 block N42 head P90 head Patrol F54 block P90/P90a head with Hydrolic lifters Cam profile for low end torque Deeper sump Anything else?

Looking for a l28 engine in good running condition. Let me know if you have one

Awesome! Thank you for the quick reply

Hi Guru's I have 260z (2 seater) with a E36 manifold and SU carbs (3 screw tops, 4 screw float bowl's) that came with the car all disconnected on a L28 engine. the previous owner has disconnected everything and let it all go bad. I am going to rebuild everything to make sure it all works right. But before I start, need to figure out how it all connects. I had a rough go at putting it all together reading lots of articles/images from google and Haynes manual. But still struggling. Can someone please help me with this? 1. Is this connected right? 2. Is this connected right? 3. Is this connected right? 4. What is this connection used for? Where does it go? 5. This was connected like this. No idea what this does. 6. What is this connection used for? Where does it go? 7. What is this connection used for? Where does it go? 8. Not sure why its connected like this. Any idea's? 9. What is this connection used for? Where does it go? 10. What is this connection used for? Where does it go? Does anyone in Vic has the same setup?

Is this still available?

Done deal PM'd

Hi Guru's, I've been trying to find cost comparison to do a RB25 vs L26 ITB EFI Conversion Build. I have looked through HybridZ but wasn't able to get a definite answer. Can someone who has done either of the conversion help me determine what I've listed in the spreadsheet is somewhat comprehensive enough to do cost analysis before I start the build. https://docs.google.com/spreadsheets/d/1uG5uGt--xe6Co_JVSVAYZsEos-x71EHKHlGtzMAq0WQ/edit?usp=sharing tia

If you are parting out, let me know as I'm interested in: - Door cards with the hand rest - wiper arms inc. motors - Full interior, liners, carpets, door cards (minus dash and console) - Cusco strut bars - Brake booster - Fuel tank with pump tia

Hi guys, I'm trying to do the Hilux front brake conversion on my 260z. Does anyone know where I can get the hub spacer from in Aus? I know I can get them from the US, but prefer to buy from someone local if available. I believe the specs are as below. Thinkness: 8mm Bore: 73.1 PCD: 4x114.3 TIA

lol like your thinking.... n it worth a shot

I questioned this as well on their YouTube video, lets see if they reply back. On another video, they mentioned its a Hiace brake booster...