Mgdatsun
-
Posts
21 -
Joined
-
Last visited
Content Type
Profiles
Forums
Gallery
Events
Articles
Media Demo
S30z Register
Store
Everything posted by Mgdatsun
-
I have a complete rear end out of car HS30 #593 that may suit your needs. Control arms, brakes, struts,3.9 diff, axles. Was hoping to find a donor car but haven't as yet. Located in Newcastle.
-
I have a pair I could offload.
-
Cars For Sale (3rd Party Sites) Ebay, Carsales etc..
Mgdatsun replied to gav240z's topic in Cars For Sale
#659 seems to have sold for $24,490 through Ebay.!!! -
I have a pair on an old 240z dash. Will dig them out on the weekend and send photos of their condition.
-
Gday 280zUSA, If engine mounts still available, I would take them. Cheers Stuart
-
PM zed280zx
-
I had a look while they were on Ebay and the one listed had E88 stamped on the side.
-
PM sent dat2kman
-
Thanks for the advice on 5th gear, I will check out main shaft nut. My reverse idler has a complete tooth missing, was working fine but seeing I had gearbox apart thought I would try and find a better one. Regards Stuart
-
PM sent to dat2kman
-
Thanks 240z71, Carbies arrived safe and sound and have all the parts I will be needing. Now to start stripping down,cleaning and rebuild. Regards Stuart
-
Restoring old cars takes patience, restoring old cars that have become classics takes bucket loads of patience. Do your homework on current prices, wait for for the right one that suits you and act fast with a money deposit to lock in the deal.
-
Gday Matt The fuel bowl I have is good I think, so could swap over with yours. Name a price with the inclusion of postage to Newcastle and hopefully we can do a deal. I have the manifold if that makes it easier but happy to take carby/manifold combo if thats how you want to sell it. Regards Stuart
-
Any chance you still had the 204z SU carbies for sale. I have a set out of 00595 but had to prize apart one carb, not sure how well it will fair. Cheers
-
The attached photo shows the worn gear I would like to replace in a FS5C71A gearbox I am rebuilding. The previous owner mentioned that it would pop out of 5th gear, so maybe a synchroniser for 5th is needed also. Thanks for your correspondence dat2Kman if you have these parts available.
-
Great, I will attach photos of parts I need over the weekend.
-
Thanks for the prompt replies. Couple of questions, 1- how do I contact Lou in this forum. 2- I have a E88 head also and wondering if that head would be more suitable than the E30 for street friendly driver.
-
Yes, rebuilding the motor out of 00593 which was original to that car. It has flat top pistons and came with a E30 head, am presuming that head would not be stock.Block is being dipped and the head vapour blasted. It has the stock 71A 5speed box that will require a reverse gear / idler? as it is quite worn on the engaging face. Not sure how easy that gear is to come by or if one could be machined to suit. Not sure what diff ratio it is as I haven got that far yet.
-
Thats the one, had been parked for years and totally rusted out.
-
Hi, another new member from Newcastle. I picked up the rusted wreck that was at Gosford NSW last year, HS30-00593 for your records, which is now deceased. I was able to salvage the drivetrain,glass, dash parts and a few extras. I am in the process of rebuilding the engine and am chasing some SU carby parts. Let me know what you have, happy to look at a complete unit. Photo attached of the fuel pipe that I am chasing. Cheers
-
Are the carbies still available? How much for the carbies and freight to Newcastle.
