Michael

# Uploading for ash after a Chat on the phone,Not a Shamefull self Post Also Will have a N42 head for sale, Will pull off for inspection later on /Manual Gearbox/ Engine block. lol..

Haha, Both items Seem Spoken for. Brave/Stupid haha. Well its Different and thats what i wanted. I Wanted a 240z, That looked like it was built in the 80's, And "Let go" until today. 80's Period mods? But, Honestly. After its all said and done. The outside's Brand new. Seats, Guages, Boost controllers all new. Seems a Let down for the engine to look Aged.. So Rb25. Well.. Rb30/25 Twin turbo :S Hope the manifold will fit haha.

Ahhh! Well After a Interesting day at the Dyno Ive decided to Get rid of my L28 Alltogether and go the rb route, Well, It was decided awile ago, But finally getting parts off the car, to make way for the new engine currently being built. 40mm - Dellorto's + Redline Manifold and Linkage, Also with 3 "Turbo" Rebuild kits. $800. (Brought the kits but never put them in, Would be Ideal for the buyer before install.) Turbo Manifold that i brought of a Member id say 2 years ago or so, Was origonally on a 240k, Its a tight fit, but Uploaded is it installed, Dirty, Messy welds, but with the Carbs it wasnt really seen So i wasnt to worried. Includes Turbo and Dump $250 Origonally The plan was the Fated, Triple Blow through's, Which "Worked" But so unreliable it wasnt funny. Engine will be Taken apart since i already have a Buyer for the Stroker block So Head + Traded block will go up soon. Btw, Pickup in Coolaroo Vic, Really Dont want to be sending away.

Ill Take the 200Zr Sump and Pickup if its not gone! Been spending too much time on Aus300zx as of Late

I'll Try to find the link but from memory, Nissan Did, Buy back and restore a number of cars (Wasn't too many), Then resold back to the public, Whether they changed anything i Doubt that, However it was a Interesting read from memory

Rb it is then! Carbied is so unreliable .. :S

Oo gotta be quick haha. I'll take 2nd dibs

+1

The Vinyl goes under any rubber seals there may be, Windscreen Door rubbers and such. Really Tight bits like head/tail lights Are normally removed to allow access. I Don't Think Wraps Will be frowned upon any more then they are at the moment since its such a new and Different approach to a Massive industry in paintwork. Thinking now, The main cars that are Wrapped Other than Business and Race Applications are Supercars, Ie The $100,000 Lamborghinis Mercs and Such. All Spending so much on there car only to pull up next to another one in there Crowd having exactly the same Car. Being in The like's of Dubai and Parts of America having so much cash flow in certain neighbourhood's Car Refinishing from Factory is always Going to happen. Lets face it, People want there Cars to Stand out, Its why we all here have Zed's, But what happens when you pull up to your next meet and see 5 Red 240z's With Rotas and black Flare's? It doesn't necessarily Take away from your car, But knowing there is another one Just like yours Leeds to more customisation normally Doesn't it? And for Big impact, There's not much better then a Wrap Quality of a Wrap is only as good as the prep behind it, Only as clean as the person who applies it and only going to last as long as you care for it. Just like paint really. However it has one advantage. It Can be peeled of to Re expose the Factory showroom finish before Resale. Which i think Works extremely well for The people who can afford the Supercars of the world. Moving up to the next model as soon as they come out. Anyway if Anyone has any questions about wraps just Shoot Btw. One part that turned me off a wrap on my own zed was the Headlight bucket, It would be a serious pain haha.

Exactly, Paint finish's Can Last well over 20 years, However they require a load of attention to maintain a Decent shine for that long a time. In Saying that, How long is your body filler Guaranteed for? As for Wrapping a Zed in Black id Definently not recommend it.. Vinyl Will never have the shine that a paint job Has. It would look fairly Tacky as said.. Having worked for a Restoration shop, A Decent paintjob Cant be beaten for "That Glossy Look" However with Alternative finishes ie Matte/Carbon/Brushed A Wrap, Can and Do seem to Stick out more from the Crowd, All for a price thats hard to compare with a Paint finish. To Put in in perspective though. I Know Both, am able to do both, And have chosen a Paint finish.

Wrapping Cars for Business's is part of my job, The biggest issue we have is Vinyl Shrinking in the summer, Even with Post heating both with heatgun/Spraybooth baking. When looking for Vinyl try and look for 3M or Avery products, Ive Never really had a problem with either. Prints and Laminates are another story.. Anyway! Vinyls are Rated at 5-10 Years for vehicle applications, So They should last as long as a Decent paint job. Application is Tricky to say the least. Best to try some spare bits before attempting the car. However im quite interested to see what your thinking of doing, Inbox me if you need any info or tips *Attached an old photo of when i wrapped my bonnet oh, About 6 months ago or so

Sorry guys, engine carbs spoiler are gone

As Requested More photos of Wheels, They are 9x17's and 9.5 x 17s. To suit Flares. Tyres have 99.8% Tread. lol. Also Come with a new Set of Wheel Nuts, *Note, I brought them without fron wheel centre caps, As they done fit on the zed anyway. Pm

Came of a L20B From memory! The motor was going to be used in a Sandrail, However plans Changed!

To Easy, If Anyone is interested on heading over to the ghetto this Weekend Hit me up with a PM!, I Can say this now that I'm Upgrading haha!

Adding photos now, Also For sale is a Bre Style Rear spoiler - $100 and Some benzed Fibreglass Flares $200 - Unfinished - Going Carbon

Well, Just about to go take Photos of all the Zed Bits ill have up for sale "Hopefully" To Be gone this weekend! Got the Realestate agents coming Tuesday and Simply Need The Stuff gone! (Cant inspect a Garage if you cant get in haha.) L28 Block N42/N42 From Memory, Unknown Condish, Comes with Efi intake manifold. $50 L28 Extrators that came with my 240z, Heat wraps abit roughed up from takeing them out, $250 Rota Rb / Rbr's Not sure, Brought from Dewit For 1400 From Memory about 9 months odd ago, Have been Bolted to the Car to Roll around, I Love the Look, But Really want a Mesh Style wheel. $1250 This weekend Only, Includes almost new Nexen 245/40zr17 (Front) Nexen 255/255/zr17 ( Rear's) Still have Nibs on them! - $1250 For this weekend only! 2 S.U Carbies that were on my 240z, in pieces Have been Sitting, But Free! Shame to throw out round tops. Will Add more When i can get outside to remember whats there, Its a little Crazy at the moment! All items Located in Coolaroo Vic.

Hey guys, Know im Throwing out a long line here, But wondering if anyone has either one of these old Plenums to suit Triple Carbs. Obviously im Aware this is the harder route, Both pointlessly inefficient and expensive Compared to Efi. However, Im loving the old Period modded look At the moment and , Well Yeah! Any info or leads would be much appreciated. Thanks Guys - Mikey

Similar to the Cartech/HKS Triple Blow through setup? Take a look for that perhaps, May be what your looking for.

No Worrys Buddy, Just Reply To my Email Or Message me if you still have my Mobile handy. When they Arrive. Thanks buddy

Sign Me Up Buddy! Ill take one, Good timing as i just blew my Supercheap Banger, Can i pick it up on the Weekend? Cheaper Than Ebay http://www.ebay.com.au/itm/Aluminium-Lightweight-Trolley-Jack-Tool-King-TJ1000AR-/120829673184?pt=AU_Car_Parts_Accessories&hash=item1c22027ee0

Haven't Read anything that Funny in a long time Ahahaha!

Unfortuanantly not, they have been on my zed for weeks now? :S

=P

In Light of a For sale add, (240kph Speedo) In Particular, I Had a good Rummage around in my Parts bin And Found This! However, I Have no plans to use it, Since Im Quite liking the White guage face look. What options do i have?? Have seen SpeedHut stuff, And its not really for me.. Does anyone have a Photo of a Simple Overlay? Wondering how they would Illuminate.. Any (help/Other Options) would be much Appreciated! (On Another note, Does anyone know What this Guage is from? :S)