Riceburner Posted February 27, 2012 Posted February 27, 2012 Hey guys I'm looking for bigger ram tubes for the FCR's I have. Can anyone tell me what the bolt spacing is on theirs mounting flanges, specifically the 40mm x 105mm style. I've seen 65mm spacing mentioned but I'm not sure if this is for the mounting holes or not... Much appreciated, Gareth. Quote
d3c0y Posted February 27, 2012 Posted February 27, 2012 You should see if OS do these in your size! Quote
RB30X Posted February 27, 2012 Posted February 27, 2012 Out of that whole article, that was my favorite pic too. Do it gareth. Quote
Riceburner Posted February 27, 2012 Author Posted February 27, 2012 They do look pretty but Like most of their stuff I'm sure they'd be worth a fortune. Hehehe. They mounting holes on my FCR's seem to be about 60mm apart Quote
Gordo Posted February 27, 2012 Posted February 27, 2012 Gareth, when you get your car on the track,it's going to be a jet. I think to save myself embarrassment it might be time to retire my zed. Lol. Cheers Gordon. Quote
Riceburner Posted February 27, 2012 Author Posted February 27, 2012 I may need a good driver though! Lol. Any weber/dellorto/mikuni spacings would be helpful too. Quote
Moderators Zedman240® Posted February 27, 2012 Moderators Posted February 27, 2012 Just measured the spacing on my 40 Solex's, with a tape measure came up with 65mm from centre of stud to stud. Quote
Scoota G Posted February 27, 2012 Posted February 27, 2012 I just did the same on my 45MM Dellortos and spacing is 65MM centre to centre. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.