YosemiteZed Posted October 8, 2011 Posted October 8, 2011 Hi pm sent on companion flange/stub axles Cheers Phil Quote
260DET Posted December 4, 2011 Posted December 4, 2011 What ratio and condition is the short nose? Quote
tir31 Posted December 4, 2011 Author Posted December 4, 2011 shortnose r200 is from r33 gts25t lsd 4.1 and vgc jon. Quote
260DET Posted December 5, 2011 Posted December 5, 2011 Would consider a 3.9:1 short nose at the right price for a spare, don't need a spare LSD center unless it's a torsen type. Quote
Ledge Posted February 10, 2012 Posted February 10, 2012 HI Jon Is the r200 long, Half shafts and flanges still available Regards Paul Quote
Ledge Posted February 17, 2012 Posted February 17, 2012 Hi Jon Yeah sorry i got your pm have been to flat out to call you. will give you a call over the weekend. Cheers Paul Quote
VegasZ31T Posted May 15, 2012 Posted May 15, 2012 I would offer to buy your R200 longnose 4.3 but it would cost almost as much to ship it to Las Vegas. Any chance you would sell just the longnose 4.3 ring & pinion? I have a bunch of Z31 differentials and engine parts if you would prefer a trade. Barring that, if it isn't asking too much, what is the best used parts web site in Australia for Nissan parts like that? Quote
tir31 Posted May 31, 2012 Author Posted May 31, 2012 hi VegasZ31T, i dont have a 4.3 gearset separate atm sorry but if 1 comes up ill keep u posted. i wouldnt know where to point you either sorry for that type of thing. jon. Quote
VegasZ31T Posted June 6, 2012 Posted June 6, 2012 Thanks anyhow. After some pushing NISMO USA is now able to order them from Japan. For future planning do you know any source for R200 long nose r/p’s in the lower 5.xx:1 range? Info like that is impossible to get in the USA. And Nissan Australia has never returned an email inquiry. The closest think I have been able to find for available ratios is the following info on LSD’s: http://www.nismo.co.jp/en/products/competition/lsd/pdf/lsd_price.pdf But it still doesn’t cover the higher numerical ratios. If you have a link to a list like the above on the available ratios I would be forever grateful. Quote
tir31 Posted June 6, 2012 Author Posted June 6, 2012 ive personally only been in contact with skyline: dr30,hr30,hr31 and z31 300zx which have 3.7 4.1 4.3 and 4.6, outside of that i cant help you with sorry. jon. Quote
rb26zed Posted June 6, 2012 Posted June 6, 2012 Hey Vegas, I'm pretty sure those ratios are available on Yahoo auctions Japan. You will probably need a middle man to buy them for you if you don't speak Japanese. Australia has a few, so I'm sure the USA would too. Ask around on Hybridz.org they will know who can get these for you. Quote
VegasZ31T Posted June 6, 2012 Posted June 6, 2012 Thanks for the model info and the leads. Unfortunately nothing higher than 4.3x was imported into the North American market, and even 4.3x's are so rare as to be nonexistent. Some other Z sites that I use for info and parts leads: http://www.z31performance.com http://www.zcar.com http://forums.240sxone.com http://forums.nicoclub.com And a general info site: http://www.carfolio.com/specifications/models/?man=4444 Quote
rb26zed Posted June 6, 2012 Posted June 6, 2012 http://www.importmonster.com.au/view?url=http://page17.auctions.yahoo.co.jp/jp/auction/v240639996&thumb=http://auctions.c.yimg.jp/f02batchimg.auctions.yahoo.co.jp/ Quote
VegasZ31T Posted June 7, 2012 Posted June 7, 2012 I forgot to mention that I have always had this option for higher numerical ratios, but I was looking for something a bit less dear – preferably used. http://kameariusa.com/L6_r200.php Thanks for everything. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.