Wolf 3D or similar

[reverendzed]

Uhmm well after no joy finding triples at the price I was hoping, I'm thinking of going fuel injected, TURBO! however while i have some of the bits and pieces required I should probably be going for an updated ECU capable of a Turbo setup any ideas or bits and pieces for sale?

Rev.

[mrp69]

 

pm sent

 

[tbscobraZ]

Are you going from stock then a full write up please as I want to do something similar. 

[modular9]

I'll only say that if you couldnt find triples for the price you wanted then you really aint gonna be able to get a ecu package like wolf3d plus all the required bits for under the price of a good set of triples. hop onto tweakit.net to find out what a haltech system will cost. eye opening to say the least.

[tbscobraZ]

Here's one the was a really nice orange new one but it went.

http://cgi.ebay.com.au/WOLF3D-V4-WIRE-IN-ECU-RB30-RB25-VL-SILVIA-SR20-CA18-13B_W0QQitemZ130329291529QQcmdZViewItemQQptZAU_Car_Parts_Accessories?hash=item1e583b2b09&_trksid=p3286.c0.m14

 

EMS is pretty goody aswell, saw it used in a skyline in performance imports recently.

http://cgi.ebay.com.au/EMS-4860-Engine-Management-System-EFI-ECU-Motorsport_W0QQitemZ110408276499QQcmdZViewItemQQptZAU_Car_Parts_Accessories?hash=item19b4d89a13&_trksid=p3286.c0.m14

[Zedman240®]

Rev, found this on ebay, used one of these in my first EFI 260Z without any issues..bit old but good to start with. You will have to run with batch injection and can be used with an 280ZX electronic distributor. Might be worthwhile buying a new loom also.

 

http://cgi.ebay.com.au/wolf-3d-version-3_W0QQitemZ120467125281QQcmdZViewItemQQptZAU_Car_Parts_Accessories?hash=item1c0c667421&_trksid=p3286.c0.m14

[Bruce]

A mate has just upgraded his wolf 3D in his 240z rally car to a later version Wolf ECU.  It is running throttle bodies. 

I am pretty sure he would be happy to sell you the old ECU if you are interested.

I don't know anything about version but can forward his number to you if you want some more information.

cheers

Bruce

 

[Zedman240®]

Bruce, ask if he will sell it with the loom; if he does, that will save heaps of time and cash!

[JazzaDam]

I know its a bit late, but I've got a second hand Wolf 3d V4 & a hand controller that needs a good home, took it out of my z to get registered plus a mechanic at some point erased all the data for my rb20det and i hadn't had any luck getting it tuned right (didn't want to spent he money to get it set up by a wolf specialist)

At the moment its sitting on my floor, at some point when i can be bothered i'll send it to wolfems to get tested, costs around $90.00, then i'll try to sell it on here or on ebay, I'd be looking for ~$500.00 including the manual on cd with the software. I'm open to negotiation.

 

Yeah so the offer is there for anyone to take it right now, I'll even express post it to you for free. otherwise wait around till i get a chance to post it with photos etc.

[luvemfast]

Yeah so the offer is there for anyone to take it right now, I'll even express post it to you for free. otherwise wait around till i get a chance to post it with photos etc.

PM sent

I hope it went through, I already listed  "PM sent". But it disapeared, probs with new server maybe 

[JazzaDam]

Hey luvemfast,

 

Got your PM, actually i got all three, sorry i didnt reply sooner, hopefully you got my reply.