nuclear_z Posted June 21, 2009 Posted June 21, 2009 Hi All, The same reason as selling my zed... If there is a problem in me posting this on the forum please let me know lurch. Body 1970 Mini K. Engine *1100 S (1380cc) block and head *G. Russel heavily lightened and balanced crank *Brand new 1275 rods (minisport UK) *New Hypatec pistons (minisport SA) *G Russel full monty head including Mk1 S sized valves and maximum porting *ARP head stud kit *new rockers *Aluminum rocker cover with custom breather port *Catch can with Speedflow fittings *Lightened flywheel *rebuilt gearbox *3.44 diff *45mm DCOE weber *genuine dual spring return weber linkage *3 core aluminum radiator * dual engine steadies from the head *facet fuel pump *fuel pressure regulator with guage *New clutch master clyinder *New Brake master cylnder *Cooper S discs front *Rebuilt rear drums *Hi-Los on all corners *Rose jointed adjustable bottom control arms *Adjustable tie rod bars *Track and camber adjustable rear brakets (minisport) *Dummy tank (hole is there for second tank but only has a dummy filler necK) *H4 headlight conversion *rebuilt alternator *BRAND NEW WIRING LOOM (minisport) - all in proper braid *oil temp, oil pressure, water temp, tacho *New indicator stalk - has flasher built in as well *6" co axial speakers covertly mounted under the dash *new black carpet *new under felt Price $15,000 neg. Please call me on 0404 867 637. May be interested in a trade Quote
C.A.R. Posted June 21, 2009 Posted June 21, 2009 That's a tidy 'Brick'. Nps posting it here mate - your not a spammer Quote
Mick280zx Posted June 21, 2009 Posted June 21, 2009 WOW what a mini. I like the bumperless rear end. Did the webber fit without firewall mods or aren't you running air filters? Nice engine internals, would've cost a small fortune. No wonder the wife wants a 'safe' car! Quote
C.A.R. Posted June 21, 2009 Posted June 21, 2009 Did the webber fit without firewall mods or aren't you running air filters? Have a closer look Mick - it's got a sidedraft box. Quote
Mick280zx Posted June 21, 2009 Posted June 21, 2009 It was a bit of a hasty look Tricky work. We'd fit a webber to ours to cure the SU drama's if there were only just a few more inches in that firewall. Good luck with the sale. Quote
Moderators Zedman240® Posted June 21, 2009 Moderators Posted June 21, 2009 I'll ask a friend if he's interested.....he used to have one but sold it. Oh, if you want to fit electronic ignition to a mini, it's pretty easy! Quote
nuclear_z Posted June 21, 2009 Author Posted June 21, 2009 Thanks Lurch! Yes, it has a firewall box put in. Because it then took the space where the dash was I built a custom dash for the car and had a bunch of special cables made... The weber can cause issues with a mini IF it is not properly done. This car has had HEAPS of work done to it - all by me. Re elecy ignition - I have had everything from electronic kits through to computers... Points funnily enough work just as well (if setup properly) and dont cost the earth if something goes wrong. Thanks guys for the comments Quote
RBZ 260 Posted July 15, 2009 Posted July 15, 2009 mate i know how you feel. felt like crap when my RX4 was on back of a flat bed and driving away. though give it few days it will wear off. expecialy if u buying a new project seems to get out of your system quicker. does this mean u can keep the z or it has to go as well? Quote
nuclear_z Posted July 15, 2009 Author Posted July 15, 2009 unfortunately both need to go for the time being. I am planning on getting a beater zed to do up and drive around... a lot of fun. I enjoy the builds the most - more than the driving... I know it seems strange. Keeping eyes peeled for a project once the zed goes. I have a couple of people looking at it pretty hard at the moment... Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.