anybody know what this part is

[psyosphere]

Hi and thinks for the help with my last problem.

i am now wondering what this part is on my Nissan Patrol Mq engine bay with L28 engine, its mounted on the firewell (i know its not a 240z or 260z but throught that you guys might know since it has a L28 "very niice" ), i think it is a manifold pressure sensor but could be wrong, as im installing a jaycar programmable ignition timing system.

it has 2 electrical connectors and has a vacuum hose that goes to the manifold, also im missing a hose off it too which io circled in yellow in the picture does anybody know where that hose should connected too.

i hop ths is a manifold sensor so that i dont have to hunt around at wreckers to find one or find a MAP sensor

 

[psyosphere]

ok looked thru the manual in the A/C section and i have found it.

its a F.I.C.D Fast Idle Control Device. does anyone know where the vacuum hose that im missing should connect too??

[younggi]

The vaccum line should be connected to the inlet or the throttle body

[C.A.R.]

It's a Flux Capacitor.

[Mr240z]

Got one powering the Zed 

[Toecutter]

Gotta be careful with those things, I've heard of people vanishing at high speeds with em installed. 

 

Sulio

[Mr240z]

Gotta be careful with those things, I've heard of people vanishing at high speeds with em installed.  

 

Sulio

 

Crack up....Good one Sulio...

 

We should all chip in and install one in Lurchs car and do us all a favor........

 

p.s still love ya big fellow and thanks for the beer you shouted me..You know!!

[Zedman240®]

I thought it was a solenoid for the NOS...you gotta have the NOS!! Can't remember the exact line in that film..you know how it goes.. fark

[Mr Camouflage]

Get your flux capacitors here:

http://www.thinkgeek.com/geektoys/plush/9fc6/