Elvis Posted January 12, 2018 Posted January 12, 2018 Best place to buy clutch master cylinder in Melbourne,price and quality.I have seen on eBay $50.00 from Thailand but not sure about quality? Quote
Retro Z Posted January 13, 2018 Posted January 13, 2018 FYI the pushrod is usually too short on the aftermarket clutch master cylinders by about an inch. You will have to remove and use your old one for it to work properly. GongZ 1 Quote
d3c0y Posted January 18, 2018 Posted January 18, 2018 I got mine re-sleeved with stainless because i was sick of the cheap aftermarket ones crapping out out after sitting for a while. It's the same price as buying new ones from a parts shops and will last a hell of a lot longer. Quote
GregTas Posted January 18, 2018 Posted January 18, 2018 I got mine re-sleeved with stainless because i was sick of the cheap aftermarket ones crapping out out after sitting for a while. It's the same price as buying new ones from a parts shops and will last a hell of a lot longer. Do you remember who did it for you and what it cost? Quote
d3c0y Posted January 24, 2018 Posted January 24, 2018 (edited) Slacks Creek Brake & Clutch here in Brisbane, $130 for both ready to go next day. Edited January 24, 2018 by d3c0y Quote
GregTas Posted January 24, 2018 Posted January 24, 2018 Slacks Creek Brake & Clutch here in Brisbane, $130 for both ready to go next day. Thanks for the details. d3c0y 1 Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.