Location For Hazard Switch '71

[aircobra]

search of the 'net shows that there should be a toggle switch in the midde of the dash. but my holes are all blanked out? was it not standard in AUS cars?

[GongZ]

Hazard light switches were not fitted to Australian market 240Z's of any year.

 

See this topic;

http://www.viczcar.com/forum/topic/6506-240z-hazard-switch/

 

From post #31;

"So, in summary, all you need to do to add hazard lights to an Australian 1973 240Z is;

- Obtain a US hazard switch

- Remove the loop-back connector from the 6 pin connector and plug in the US switch

- Install a 12V flasher unit to the previously unused L-shaped two pin (one green and one white wire) connector near the blinker flasher unit.

I would imagine that the same would apply to earlier 240Z's, using the appropriate vintage US hazard switch. They may even be interchangeable, because the 6-pin connector looks identical - just check the wiring diagram for your model."

Edited March 12, 2017 by GongZ

[gav240z]

search of the 'net shows that there should be a toggle switch in the midde of the dash. but my holes are all blanked out? was it not standard in AUS cars?

Do you even search bro? I find you often start threads on topics that have been covered in detail before.

[aircobra]

thanks gongz. off to ebay for the switch.