Moderators PB260Z Posted December 23, 2015 Moderators Posted December 23, 2015 (edited) Hi After pulling the exhaust manifold off to fix a blown a gasket, I have discovered that the problem is actually the manifold seating face has eroded away. Thus, I am in need of a factory standard S130 L28 Exhaust manifold with EGR . Would prefer Sydney so I can collect and get on the road during my holidays. As always happy to cover reasonable costs. Appreciate any help Cheers PB Edited December 23, 2015 by PB260Z Quote
satrat z Posted December 23, 2015 Posted December 23, 2015 Hi PB260Z, I think I have the manifold you are after, it came off a fuel injected L28 and is the standard manifold. I will check it in the morning. I am in Coffs Hbr so not sure what you would want to do postage wise if its the right one. Quote
Moderators PB260Z Posted December 23, 2015 Author Moderators Posted December 23, 2015 Hi Mate Sounds like the like the one I am chasing. When I am back in Sydney on Boxing Day I will take a couple of photos and post them up. Thanks PB Quote
NEW240 Posted December 27, 2015 Posted December 27, 2015 Peter I have a couple, not sure which one would suit. Put up a pic, and any stampings so I can compare. vince Quote
Moderators PB260Z Posted December 27, 2015 Author Moderators Posted December 27, 2015 (edited) Hi, Hi PB260Z, I think I have the manifold you are after, it came off a fuel injected L28 and is the standard manifold. I will check it in the morning. I am in Coffs Hbr so not sure what you would want to do postage wise if its the right one. Peter I have a couple, not sure which one would suit. Put up a pic, and any stampings so I can compare. vince Below are a coupe of images of the manifold I need. It is the factory standard exhaust manifold from a 280ZX (1981) and has a fiiting for the EGR pipe (needed for rego) It has two stampings on it 1327C on the inner side just below the centre ports JAPAN F54 on the outer side between ports 5 & 6 Any help greatly appreciated Edited December 27, 2015 by PB260Z Quote
NEW240 Posted December 27, 2015 Posted December 27, 2015 HI Peter. Unfortunatly neither of mine have the EGR provision. The blanks are there but not drilled or threaded. Quote
Moderators PB260Z Posted December 28, 2015 Author Moderators Posted December 28, 2015 (edited) HI Peter. Unfortunatly neither of mine have the EGR provision. The blanks are there but not drilled or threaded. Hi Mate Thanks for looking I appreciate it. I have a couple of other options so hopefully all good Cheers PB Edited December 28, 2015 by PB260Z Quote
Moderators PB260Z Posted December 29, 2015 Author Moderators Posted December 29, 2015 Gidday Thanks to evrybody who responded either via the post, PM or SMS. I now have the manifold I needed, and another part that I will cover in the build thread. it is really encouraging the level of support you get from this group. Thanks again PB Quote
zeds4ever Posted December 30, 2015 Posted December 30, 2015 G'day Peter , pretty sure I have one in my shed . Will check tomorrow & post a pic for you. Regards: Alan. Quote
Moderators PB260Z Posted December 30, 2015 Author Moderators Posted December 30, 2015 G'day Peter , pretty sure I have one in my shed . Will check tomorrow & post a pic for you. Regards: Alan. Thanks Alan, but I picked one up yesterday. Cheers PB Quote
zeds4ever Posted December 30, 2015 Posted December 30, 2015 No prob's mate , you must have put your reply up same time as mine. Have a happy & prosperous new year mate. Regards : Alan. Quote
Moderators PB260Z Posted December 31, 2015 Author Moderators Posted December 31, 2015 Thanks Alan Happy New year to You & Yours as well. Cheers PB Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.