Blue Z

Hi Katokid, A huge thank you, I now have new CV boots for reasonable price. Thanks Blue Z!

Hi Z Fans, Just wondering if anyone has the part no. for the 300ZX Outer and Inner CV joint (4 bolt on the outside)? Or a good source to find replacement ones? Cheers Blue Z

Hi CraigZ, Would you still like to take them?

Hi 1000 plus club, The centres will suit about 77-78mm, it not perfect measurement with the plastic. Do you still want them? Regards BlueZ

Hi All, I have the 4 x centre caps from some performance wheels, which no longer have. They are brand new never used. For a $10 donation to the VicZCar website they are yours, I will even look after the shipping within AUS. Please make a comment that you would like them and send msg of proof of donation and I will then ship. BlueZ

Hi Greg, These guys have few options, I have never used them but would be my choice. https://technotoytuning.com Regards Blue Z

Hi All, Good news I now have the bell housing off, I ended up breaking the seal by forcing in an window scraper blade. 1) As I have no shifter does anyone have a recommendation for a short shifter for the RB20 gearbox? 2) Any recommendations for the machining on the L series bell housing in Melbourne? Thanks Blue Z

Any offers on the oil temp gauge considered, also happy to post it. Perfect to make sure your not cooking your oil. Blue Z

Thanks Lurch, Looks like need a big soft hammer to open it up, as you suggest, it hasn't moved yet.

Hi All, I have an RB20 gearbox and I have done the following: 1) removed front cover plate, inside bell housing 2) removed bearing circlip under cover plate 3) removed bolts from sandwich plate holding bell housing on The issue is that I can't take the bell housing off, have I missed something? BlueZ

Air box and Filter now sold. Oil temp still available

SMS sent ilbert.

Hi All, Few pieces that I have in the shed: 1) Sparco oil temp gauge, thermal expansion type $30 (due to change of sump I had to change to electric sender type) 2) 90 deg 3" stainless bend and K&N filter $60, Filter needs a clean but otherwise fine. 3) L28 Airbox to suit 45mm Webber or EFI hardware ITB, $100. (Made by Gordon Dobbie) Location Eastern Suburbs Melbourne Would be open to a trade on a reasonable 260z 2+2 boot lid with glass. Regards Blue Z

Hi Justin, Yes one with switch, yes O rings only from memory.

Hi Justin, I had the exactly the same issue, just pull out the pressure differential switch and replace O rings. The O rings in mine had split and caused this fluid pumping issue. Good luck, Blue Z