vramjee91

hey guys Wanting a set of 15 or 16inch wheels to suit a 240z. Currently have a set of 17inch rota's which about 80% tread. Looking to swap with cash adjustment or a new set all up. Please let me know Cheers Vivek (Wanting to dump the car)

Interested in the Gauges, if the person who got in first doesnt want it

Looks clean as Jason! Ill be in Adelaide this coming week, would love to come down and have a look!

SOLD!

Hey guys selling 3 40mm dellorto's asking around 500 bucks, excluding linkages. Let me know. Pick up is in VIC. Happy to take it off ebay if someone here is keen. http://www.ebay.com.au/itm/Dellorto-Triples-DHLA-40-Hemi-Holden-Datsun-240z-260z-Toyota-Ford-/321552282840?&_trksid=p2056016.m2518.l4276 In good condition. no broken ears etc Cheers Vivek

http://www.ebay.com.au/itm/New-Datsun-240Z-260Z-front-bumper-Lips-spoiler-body-kit-x-1-/351142155481?pt=AU_Car_Parts_Accessories&hash=item51c1b414d9&_uhb=1 This is what I am using. Might take a week to ship down

Is this for your Black Car?

Hey guys, Just after some advice, would the Twin solex 40mm downdraft carburettors, with a idf bolt pattern, model 40p11c6 be suitable for an L26. Would they also be able to be a good replacement for webers? Any advice would be good. Cheers Vivek

Hey guys, Wondering if anyone would be able to help me out with finding a High Beam/ Low beam switch. It looks like the white switch in the attached photo. Help would be much appreciated cause mine is bust and I had to hard-wire the lights to get them to work, and obviously that means I cant use the high and low beam function. cheers vivek

As the topic title suggests. Please let me know. Preferably in Melbourne. Regards Vivek

Hahah

Aw miss out! Yeh man, pop over when ever!

Oh well there you go.... How much was postage Tai?

Hahaha yeh. they are held in with 4 bolts all up. 2 in the front and 2 in the rear. Just hadn't drilled them in yet. I was thinking that, however its all the way over in QLD, and would be around 100 bucks to ship. Might as well get my covered for 550.... I really like this dash. Might splurge later on...

Guys: Progress has been coming along slowly. I currently have the L26 running well, but have a electronic dizzy coming to hopefully make it run smoother. I am currently working on the Inside, and have managed to get all the electrics working and interior dash lights, with the exception of the headlights. I reckon it has something to do with the stalk, cause the light switch does a full 360. Not sure how to fix this. Still deciding on what to do with the Dash, and console area. Open to suggestions. It currently is cracked and no good. I have the MSA seatbelts to install this weekend. Hopefully it goes all well.

Here is the bracket I used. I will pop up the instructions and measurements when I get a chance this week.

Pop over when ever. You know where I live.... Hahaha Your is coming along well!

Rx7 Seats installed. Look heaps better than the Rx8 ones.

Cheers for the comments guys. I just didn't like how the current Choke mounts onto the centre console, and was trying to figure out a way to not mount it there. It seems to put unnecessary pressure on the console. Might need to think about where else I can relocate it.... Or I just go with Triples

Hey guys, Just wanted some advice: Do I need a choke? I am currently running an L26 with twin carbs. Is there any way to bypass the choke without going to EFI? Cheers Vivek

Might just try that. Wasnt sure how those system are. http://www.ebay.com.au/itm/170969218380?ssPageName=STRK:MEWAX:IT&_trksid=p3984.m1423.l2649 Is this the one you recommend? You havnt had any issues with them?

Hey guys. After a Dizzy from a 280zx preferably with Coil. Please let me know

Hey mate, great detail & thread. I got a new brake booster from ABS Auto in Richmond. Might be worth maybe calling one of the Sydney Branches.

Hey guys. There was a 260z 2+2 that was showed a while back, where the owner cut the back pillar area to give it the shape of a 2 seater. Does anyone still have that video or link? Would be much appreciated. Cheers Vivek

The project is coming along nicely man! Keep it up loving the read