vramjee91

Hey guys, thanks for the replies. I would like to note that I am not a mechanic by trade, so please excuse the plain language. There hasnt been much change. The car hasnt been running, and now is the first time. The L26 was originally in a 260z I previously had, but had an auto box attached to it. I then swapped it over to a manual, and dropped it into my 240z. The gearbox is a standard 280zx box, and the diff is the normal diff you would get in an auto 71 240z. When it starts off in first gear and you put the foot down, there is a really high rev, then when you change gears the revs dont drop as you would expect. This occurs in 2nd and 3rd gear. There also doesnt seem to be much response when putting the foot down, not sure if this because of the high revs or what. When I drove my 260z around, it was lot smoother, and a lot more responsive. Cheers

Hi guys, Just been driving my 240z around, and there seems to be some very high revs and poor gear changing response. It has a L26, with a 280zx box, along with a standard 240z diff. I know its a long shot, but does anyone know why this might be the case? is it the ratios? Cheers Vivek

Hey guys, Just after some 240z Seats. not fussed about the seats, as I am more after the rails. Please let me know Vivek

Hey guys. Sorry to all the above, but SOLD!

Hey guys, I have a P90 Head up for sale. No Cracks, and pretty clean. Pulled off a working L28 Will post pics up soon. Make an offer.... Cheers Vivek

You will either love it, or hate it.... Here are some pics of my interior.

Any Update Rob?

Lets do it! Especially since you are literally down the road! You are welcome to pop by when ever as well.

Hey guys, Here is a bit of an update. Got the inside all done and dusted minus the centre console, Dash and seats. Have a pair of RX7 ones ready to go in, its just a matter of getting around to doing the brackets. Anyways enjoy

Hey guys, Just after a few things for a Datsun 240z (1971) 1. Passenger side window winder 2. Window lower chrome mouldings 3. Rear hatch gas strut 4. Rear number plate light (Panel/Holder) 5. Pillar badges (not the one with 240z on it) 6. Dash aircon/stereo vent Let me know if any of you guys have something Cheers Vivek

is it too late to jump on one?

Hey guys Wanted to buy an l28. Let me know if anyone has one lying around Cheers Vivek

Hey Gav, How's the wood behind the door cards? They will be getting recovered, but just want to make sure the board is okay. Cheers Vivek 0405804305

Hey guys, Just wanted to know if anyone had the following: 1. Door cards to suit a datsun 240z (Or anyone knows of how to get new boards) 2. Centre console 3. Aircon vent cover Please let me know. Cheers Vivek

Thanks Roberto, Nah this was from QLD originally. RHD

Hey guys, here is a bit of an update of where I am at. It is currently getting some interior work done Pics will be up soon!

PM. Ill take the pillar badges, and any of the interior stuff that the other guys have not.

Hey mate, how did you go with the install?

Cheers for that Tai, Might take you up on that offer!

Hey guys, Just wanted to know if anyone had some recommendations on coil-over install? I have a set of GC Coil-overs ready to go in. Please let me know Cheers Vivek

Where you able to find any Zedman?

Hi Zedman, It was one to fit an early 240z. As long as it has all 3 pins I am happy! Cheers Scooter, might give you a call sometime this week

Hey Guys, Just after a few bits for my project: - Front and rear bumper - Pillar badges, or any other badges that you may have - Window Winders - Window Wipers Please let me know if you guys have these bits. Cheers heaps Vivek

Here are some more pics. The update is that I should have it completed and painted in a couple of weeks, and it shall be in the mechanics getting ready for club rego. Fingers crossed!

Sweet! Cheers for that. Look forward to seeing some pics!