In keeping with the shed clearing theme at the moment

[hunterzed]

Ok I have a few parts up for grabs. All parts are are from 280zx's and are pick up only from Newcastle/Hunter Valley area. I'll update the bottom of this post as things are sold.

 

5 speed gearbox from a running 280zx. Only removed last month.

$250

 

2 x L28 engines complete with EFI manifolds, eletronic dizzies, wiring loom and ECU. I think I only have one spare air flow meter though. Both of the engines are F54 blocks with N42 heads. Both engines have around 100k on them but have been sitting around for a couple of years so I don't know the condition of the seals etc. Should be ok.

$200 each

 

R200 Open diff with Uni axles

$200

 

Front and rear KYB struts with King springs, standard hieght.

$200

 

I should be able to put together a rear disc conversion kit for S30's as well but I need to have a look when I get home on break in a couple of weeks.

This will include the discs, hand brake cable and calipers for the rear but doesn't include the adaptors to bolt them on.

$200

 

I have a few other bits and pieces like seats and interior trim parts as well. PM me for more details.

 

Both of the engines and the Diff are sold pending payment.

[FLEXZED]

hey steve

 

thats not my r200 you have on here is it  :o

 

Loui

[WogsRus]

I Might have to take one of those engines, but freight to tas would be a beatch. What condition are the motors in?

[hunterzed]

hey steve

 

thats not my r200 you have on here is it  :o

 

Loui

 

No Loui. Your diff is still here and still the same price for you. Haha.

[hunterzed]

I Might have to take one of those engines, but freight to tas would be a beatch. What condition are the motors in?

 

First post updated.

[FLEXZED]

thanks mate

 

wasnt sure if you had drank enough over the xmas period to maybe forget

 

haha

 

Loui

 

[herrods]

any crunching, synchro issues or other not so crash hot stuff we should know about teh gearbox?  I am sorely tempted to grab a spare!

 

[hunterzed]

The only reason I took it out of the car is because I replaced the motor and it had a gearbox already attached to the new engine so easier than lining up the box etc. It ran really nicely and changed gears quite well with only the usual notchy gear shift between 2nd and 3rd on occasion. No crunching or grinding at all though. I do know that its not the original box from the 280zx that I removed it from but it cam from an '82 280zx.

[Cdr Zero]

I'll take one of those L28 engines, ta 

 

That R200 diff, can you put new LSD internals into it?  Bit of a noob with this stuff but keen to learn. 

 

EDIT:  Did some research (read: used the search function on the forum) and will take the R200 as well. 

 

EDIT 2:  Post needs more smilies           

[hunterzed]

Ok. One of the engines and the R200 diff are sold pending payment......and just for you cdr....  ;D ;D ;D ;D

[T.A.P]

Just out of curiosity what ratio is the diff?

[hunterzed]

Just out of curiosity what ratio is the diff?

 

I'm working up in QLD till the 19th so I can't check it till then.

[nedloh312]

Sent you a pm for a l28 motor

cheers

[hunterzed]

Sent you a pm for a l28 motor

cheers

 

No worries. So that is now both engines sold pending payment.

[hunterzed]

I also have a couple of sets of rims that are up for grabs as well.

 

Cheviot hurricane rims for that old school look for your zed. 14 x 7 standard offset.

$200 neg

 

Standard rims from a 280zx.

$200 for a set of 5.

 

[Wayne]

Any chance of a series two left hand rear caliper? Sorry, but I have to keep asking. One day my ship will come in!

[hunterzed]

I do have a series 2 LH rear caliper but I was planning on selling it as a complete kit to for someone to convert to disc rear end.

[Wayne]

Thanks for the reply, please let me know if that dosen't work out and you want to sell just the left hand one. I have the complete setup on my 240 but my left caliper is stuffed. Thanks again, Wayne.

[Motorsport Freak]

do you still have the parts for the rear disc conversion kit for S30's?