Mr Green Posted June 20, 2009 Posted June 20, 2009 Hi, I have an engine for sale. It's an L28 standard rods and pistons. P90 Head, ported (40mm inlet), matched chamber capacities, 11.5:1 comp. Large capacity sump with a windage flap. Possibly a lighter flywheel?? A stiff clutch and solid centre. Polished rocker cover, mild cam of some sort (smaller than 72 deg). Made 100KW/wheels. No manifolds. The balancer and dizzy are damaged. The Electronic dizzy only has a mashed cap and rotor button. Would also need a new front pulley with a crank angle sensor. There is rust on the valves and no doubt a little in the bores, so pull down would be required. Brand new spare head gasket to suit. Asking $800. Melbourne East 0427301030 Also have an Autronic SM2 ECU and loom to suit. Extra $800. The dizzy should probably go with the ECU. Quote
C.A.R. Posted June 20, 2009 Posted June 20, 2009 And you live in the 'either' with no available contact details & the price is eleventybillion dollars? Quote
MickyG Posted June 20, 2009 Posted June 20, 2009 Ahhh Lurch - took you less than 7 minutes. Do you actually smell the new blood or do you have some 6th sense? Quote
dorifticon Posted June 25, 2009 Posted June 25, 2009 Any pics of the porting work that's been done? Also, re: the cam, how do you know it's not a stocker? Any specs? Finally, would you consider separating head and cam? Shoot me a PM if that's easier. Cheers Andrew Quote
dalee Posted June 25, 2009 Posted June 25, 2009 Go on Spamaster - that engine would work very well with the auto. Quote
Mr Green Posted June 25, 2009 Author Posted June 25, 2009 If i remember correctly the exhaust had close to the same lift as standard and inlet no more that a 72 deg cam. It made 100kw at the wheels and needed a bigger cam. Also have a 72 deg cam kicking around. No pics of the porting. A bit of detail to get valve seats and chamber capacities right. 11.5:1 compression. The inlet ports are 40mm Dia from the outside of the head. Some of the valves are rusty, and would need a pull down. Would prefer to sell as is. Quote
lightmaster240z Posted June 25, 2009 Posted June 25, 2009 pm me if it $100.00 it mine ;D the one and only Spa Master Ps pm any way regrads Bruce Quote
luvemfast Posted June 25, 2009 Posted June 25, 2009 $100?? Thats for the cam is it not? or Is the whole motor $100? If so, I'll take it if Spamaster falls through. Quote
S30Mike Posted June 26, 2009 Posted June 26, 2009 Thats for the cam is it not? or Is the whole motor $100? If so, I'll take it if Spamaster falls through. haha, i think thats for the cam otherwise everyone would be jumping in on this! Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.