Mr Green

Thanks for all your interest guys. I now have no more parts left.

Hi , I still a couple of boxes of Zstuff that might be useful to the right person. Please come a collect from me, as it would be a shame to chuck it out. I have included a couple of photos of the parts. Regards Gavin 0427301030.

MT Waverely Gavin 0427301030

Just thought I would post some more photos.

Yes both the radiators look to be in working condition. One is a 3 core with wide spacing fins. The other a 2 core. $100 for the 3 core $75 for the 2 core? If I have the EGR stuff then I would be willing to sell it, yes.

Yes the half shafts are to suit the R180 diffs. $20 each? Yes my car had a R200 so they are probably not much use for most of you. I don't have a R200 anymore but I do have a diff guard (6mm alloy bash plate) to suit. I guess it will also fit a R180. I was pondering making some CV's so I have a skyline doner shafts that need the be shortened too. Interior trim, I think I have a heater box, Windscreen demister grill (seen in photo) a couple of different gearstick boots (possibly not from z cars) Pedal boxes, steering wheel (poor), scuff panels (in photo). A box full of rubber parts, another full of bolts, rodends, knuckles, tierods and stuff, a wiring diagram for a 280z (not ZX) enlarged to A1 and laminated. 3x fuel injection manifolds (one was the turbo version), and a bit of a glove box.

$100??

If i remember correctly the exhaust had close to the same lift as standard and inlet no more that a 72 deg cam. It made 100kw at the wheels and needed a bigger cam. Also have a 72 deg cam kicking around. No pics of the porting. A bit of detail to get valve seats and chamber capacities right. 11.5:1 compression. The inlet ports are 40mm Dia from the outside of the head. Some of the valves are rusty, and would need a pull down. Would prefer to sell as is.

Most of the parts I assume are for a 2 seater zed but have been a collection from all over the place and most were spares when i bought my car. I actually wasn't aware there was a difference between models for the cross members. I do have a mostache bar, it has been reinforced. I don't know what the tail light surrounds are from, they're steel so I'm guessing a 240z.

Hi I have a bunch of parts that I now no longer require and would appreciate someone to purchase them. Some photos are attached, among other parts. I have no idea on pricing, perhaps you could make an offer on any the bits you see. Mt Waverely area.

Hi, I have an engine for sale. It's an L28 standard rods and pistons. P90 Head, ported (40mm inlet), matched chamber capacities, 11.5:1 comp. Large capacity sump with a windage flap. Possibly a lighter flywheel?? A stiff clutch and solid centre. Polished rocker cover, mild cam of some sort (smaller than 72 deg). Made 100KW/wheels. No manifolds. The balancer and dizzy are damaged. The Electronic dizzy only has a mashed cap and rotor button. Would also need a new front pulley with a crank angle sensor. There is rust on the valves and no doubt a little in the bores, so pull down would be required. Brand new spare head gasket to suit. Asking $800. Melbourne East 0427301030 Also have an Autronic SM2 ECU and loom to suit. Extra $800. The dizzy should probably go with the ECU.