bushes need a doing

[Razz]

does anyone know where or who i can talk to about getting all bushes in the car changed?  I talked to Chris at Inline in QBN but he's always way too busy ( or he's avoiding the Z) So im back on the hunt for a full bush change, Canberra region preferred.  anywhere recommended i should check out?

 

Cheers,

Scott

[Mr240z]

I just done mine not long ago....

 

Just have a go.............. and save yourself so money...Pretty easy.

 

You'll feel good after you've done your own work, and you'll learn as you go.

 

HAVE A GO!!!!!!!!!!!!!>>>>>>>>>

[xa1973]

Hello Mate

 

Why dont you give it a go yourself, most are very easy and fairly simple

 

Theres some some good articles on here for the difficult ones,

 

IE: Rear Suspension Assembly , Rear Member Assembly and front Transverse Link ( lower control arm )

[Razz]

yeah, i hear the front's aren't too bad, but the rears are an absolute nightmare. so was thinking the fronts wouldn't be too bad to try, but rears i might shop around

[C.A.R.]

Scott - fronts are easy.

 

Rears are a wee bit harder, but not unpossible.

You just need a jack, axel stands & a socket set

[warrenz]

As everyone else said the rear's are the tough one's to get out.

 

I disassembled the rear suspension and after I gave up , I took the trailing arms and the new bushes to Pedders and had then press out the old ones and put in the new ones, did not cost me very much.

 

The rest are very easy.

 

Warren

[2+2er]

WARNING!

 

When changing the front lower control arm bushes, you must remove the shell from the arm.

 

My energy suspension kit said to leave them in and I killed a set of bushes forcing them in 

 

Picture of the offending part below