Aussie260z Posted February 18, 2009 Posted February 18, 2009 Hey guys, Selling some of my old gear - this is an RB conversion for a Z, They are Castlemaine Rod Shop mounts with reasonable engine mounts, offset gearbox crossmember and balanced tailshaft, all you need is a rear sump and your away! This gearbox crossmember uses the original Z engine mounts - 260z (won't work with the 240z!!!) and won't work with the bigger RB25 gearbox as it is a fat sucka! Will work with the RB20DET & RB30 N/A gearbox! After $420 for the lot! I will also throw in these other engine mounts I whipped up so I could use a bolt/bush style mount - however, you will need to modify your crossmember to use these engine mounts! I can be contacted on - 0403 836 526 or tonycharger72@hotmail.com Quote
Aussie260z Posted February 20, 2009 Author Posted February 20, 2009 To much $$$ :-)? Open to offers fella's, this stuff is just taking up space and it would be good to make someone's life easier swapping an RB into the car instead of sitting in a box in my garage :-)! Quote
Aaron Neubauer Posted February 23, 2009 Posted February 23, 2009 Are you interested in parting with just the tailshaft? Quote
Aussie260z Posted February 24, 2009 Author Posted February 24, 2009 Yes probably, had an offer on the mounts - but you sure this will suit your application mate? Quote
Aaron Neubauer Posted February 24, 2009 Posted February 24, 2009 Yes probably, had an offer on the mounts - but you sure this will suit your application mate? I have the exact same CRS kit sitting will all the other crap (read: infrastructure) I've accumulated and having a tailshaft would be handy. Saves having to get a spline and someone to make one up. Quote
NZeder Posted February 24, 2009 Posted February 24, 2009 I have the exact same CRS kit sitting will all the other crap (read: infrastructure) I've accumulated and having a tailshaft would be handy. Saves having to get a spline and someone to make one up. I think he means .... looking at your signature you have a 2+2 and this shaft will be for a 2 seater = too short = mods = just do your own for the $$ Quote
Aussie260z Posted February 24, 2009 Author Posted February 24, 2009 Thankyou Mike, sorry, I should have made myself clearer! This tailshaft is from a coupe, will not just bolt into a 2+2, not long enough! I am in Canberra! Quote
Aaron Neubauer Posted February 24, 2009 Posted February 24, 2009 I think he means .... looking at your signature you have a 2+2 and this shaft will be for a 2 seater = too short = mods = just do your own for the $$ Snap! I didn't see that, thanks for pointing it out Quote
sco_aus Posted February 25, 2009 Posted February 25, 2009 Chris240 has been contemplating doing an RB conversion here in Canberra, maybe try hitting him up. Quote
Aussie260z Posted February 25, 2009 Author Posted February 25, 2009 It's good, the mounts and the gearbox crossmember are sold, anyone want a tailshaft :-)! Quote
Aussie260z Posted March 3, 2009 Author Posted March 3, 2009 Engine mounts and gearbox crossmember have been sold, The Tailshaft is still available! Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.