Possible rewire of 2+2 wiper motor.

[zeds4ever]

Whats the possibility to rewire a 2+2 wiper motor so as to work in a {76} 260Z . 

The 2+2 motor has two common black wires of which one would be for the negative & I'm guessing the other common black

wire is for the wiper blades to return to rest position when switched off .

[nat0_240_chevZ]

I have done this to use a 2+2 in a 240z. With a 75?260z engine bay wiring harness, A long time ago and exact detail is patchy. 

But the problem was where it stops. I had to use 2 x 5wire relays to alternate the ground & power to trigger the stop firmly, as ot was over running, but may be because of not driving the wiper arms, as it was all bench tested then installed.  But. Works normally after the mod. Alternatve of trying to turn wipers off at the right time was near impossible time. 

Edited September 21, 2019 by nat0_240_chevZ

[C.A.R.]

You can install a 260 wiper in a 240, but if you just plug it straight in you only get one speed.

Unless you do what nat0 has done above.