jjjoel Posted February 17, 2018 Posted February 17, 2018 Hello, my name is Joel from Wollongong, NSW In the process of (remembering how to!) putting back together '74 260z 2+2. Build no. 000721 Been painted 2K back to original Silver 306, and going to need a full interior. Day of purchase pics to follow... gav240z 1 Quote
jjjoel Posted February 17, 2018 Author Posted February 17, 2018 My photos taken in the seller's back yard some years ago, I crawled around on the wet grass checking floor pan, firewall, etc. He was apparently second owner (after some old lady purchased new, always lady owner!), but all panels had been treated with some anti rust system because I could see red plastic plugs drilled into sill panels, rear qtr, etc. with a company name on them (Wynns maybe?) Seemed to have done the trick because rust was not a major issue in the usual places - In z car terms. Interior cracked up, door cards warped, carpet threadbare, dash cracked everywher - but all there and largely unmolested. Anyhow, newer pics to follow now that its back in the driveway, with plenty of reassembly questions about to be asked!?! Cheers Quote
Moderators PB260Z Posted February 18, 2018 Moderators Posted February 18, 2018 Hi Joel. Welcome to the forums, there are a few Z owners on here from the Illawarra and surrounds. I look forward to seeing some pics of your Bus as it is today then following your progress as you get it back on the road. I qlso have a bus so may be able to provide some images of what goes were etc. Cheers PB jjjoel 1 Quote
MikeZ Posted February 18, 2018 Posted February 18, 2018 Welcome Joel, good luck with the reassembly! I'm at the tail end of a complete interior overhaul too. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.