Park Lights / Turn Signals Below The Bumper Bar

[PeterH]

I'm hoping some one can help with the length of the screws that hold the lens to the housing.

When I dismantled mine ( they were all broken , lenses and housings, with most of the screws rusted and broken ) I only managed to salvage a few  screws ....they are M3 and 30mm long 20mm long and 16mm long.

My question is ... how many of each size are used. . I'm looking at using stainless screws.

I can have an educated guess but would be happier knowing the orginal sizes.

 

 

 

Pete

[Andrew_L26]

I have a dealership service manual that I think would have the screw sizes, I'll grab it out of the car tomorrow and see if it contains anything helpful

[74zzz]

while your at could you tell me the screw sizes for those found in the console? cheers

[24TZ]

Dealership Service manuals are located here for anyone looking

 

http://www.nicoclub.com/datsun-service-manuals

 

I had a quick glance through them but didn't see many bolt sizes listed, it was a quick look though. Other good info in there

[gav240z]

while your at could you tell me the screw sizes for those found in the console? cheers

 

I would like to know, but I actually got another early 240z console from the US recently and it contains a bunch of fasteners which might be correct. Only problem though is I don't have a tap and die set with a way to measure the thread / pitch size etc..