Jk_zeder Posted September 11, 2013 Posted September 11, 2013 NOW PARTING OUT SEE HERE For some of the build and Pics go here - http://www.viczcar.com/forum/index.php/topic,9086.0.html This car has only been out a total of 3 times . It managed a 64 in a large pack at Lakeside (first time every out) A 64 at QR on Clubman, first time on the track. Also managed a 63 second lap at Norwell, enough to beat 57 other cars. Engine – Approx 6500ks as it did a drive to Tassy for Targa and back to the coast before I purchased it from a mate. Made 170rwhp and 370nm of torque. Tuned by Gavin Wood. Hot tanked P54 Block Bored 40 Thou. New flat top pistons & rings N42 Cyl Head – Crack tested and machined New bearings – Big End and Mains Fully balanced New Camshaft Nissan 812C 495 thou lift New Rocker Gear & Lash Pads New High Volume Oil Pump New Timing Chain and Sprockets New Adjustable Timing Gear SW Motorsport Harmonic Balancer New Electric Water Pump (CSR) Fully Modified Fuel Injected Inlet Manifold New Alloy Fuel Rail and Pressure Gauge Enlarged Throttle Body New Nissan R32 Injectors Fully Balanced and Lightened Flywheel Competition Velvet Touch Button Clutch & Pressure Plate Extractors MSD Master Blaster Coil/Fully Modified Electronic Distributor MSD 6-AL V500 Wolf Computer Modified and Baffled Sump Alloy Radiator with twin thermos 2L Surge Tank mounted in the engine bay EF Falcon pick-up pump Bosch 044 fuel pump Light weight race battery VL Turbo Starter Motor Driveline – RB20DET 5-speed (fresh 0ks, just had rebuilt have receipts) R180 locked diff with 4.8 diff gears New tail shaft – being done this week Suspension & Brakes – Techno Toy Front and Rear Lower Control Arms Techno Toy Tension Control Rods Ground Control Weld-On Coilover Setup Eibach Springs (330lb Fronts 300lb Rears) Tokico Illumina 5-way adjustable shocks AZC Wilwood 4 pots all round Rota RBX 9.5 rears/9.0 fronts -19/-13 offsets on Fed RSR Semi’s Interior – Racepak Digital Dash running off the ECU OMP Detachable Steering wheel OMP Widebody Seat (Only a year old) OMP 3” 4point harness (only a year old) Saas Bucket Seat & 2” OMP Harness for passengers Full switch panels for everything I’ve tried to include as much as possible, this car has had a lot of hours put into it, every single bolt and screw has been replaced for new. There’s been a lot of little modifications in which I am happy to go over with serious buyers, a lot of the guys up here fed us with a lot of very useful info so we were able to skip a lot of R&D and get a competitive car on the track. I just do not have the time for the car anymore and wish to get back into a better street car. I am interested in swaps+ cash or clean swaps or the car +cash your way for anything of interest, show me what you have, don’t be shy! PRICE: $16,500 Car is located on the Gold Coast. Please PM me or SMS me on zero4seveneight118718, I work a lot of hours so cannot accept calls a lot of the time. Going to be sad to see it go but it's worse to let it sit in the garage, I'd rather someone enjoy it. Cheers fellas, James Quote
Gordo Posted September 11, 2013 Posted September 11, 2013 Nice car JK. It's a shame you have to sell it. Good luck. Quote
44014 Posted September 11, 2013 Posted September 11, 2013 Is the car regoed and or engineered or could it be to go back on the road ? Quote
Jk_zeder Posted September 11, 2013 Author Posted September 11, 2013 Its completely gutted mate, getting it back in the road would be a mission. Quote
Jk_zeder Posted September 11, 2013 Author Posted September 11, 2013 Caged and lgbooked? No cage, was next to happen. Never got to a CAMS event Quote
260DET Posted September 13, 2013 Posted September 13, 2013 Pity it has to be sold, did very well the few times you did track it :-\ For anyone who is interested in a track car in Q there are plenty of events to run it in competitively, does not need to be log booked. Quote
James51 Posted September 24, 2013 Posted September 24, 2013 What are the effort levels to get her back to street legal? None of the pics on the build thread will come up Quote
PZG302 Posted September 24, 2013 Posted September 24, 2013 And the car would be fully compliant with 2B prodsports by fitting the headlights and changing the rear wing by fitting something a bit smaller. You could then run anywhere, such as sprints, hill climbs in championship classes as well as door to door when you want to step up. Door to door includes CAMS championship sprint races in QLD, NSW and Vic, as well as the one hour series that is run at Bathurst at Easter, Wakefield, QR or Warwick and finishes at Phillip Island in November each year. PLus can be run various AASA events that are either prod sports rounds or run to prod sports rules in Qld, Vic and NSW plus the 300km races at Wakefiled and Winton. Quote
Jk_zeder Posted September 24, 2013 Author Posted September 24, 2013 What are the effort levels to get her back to street legal? None of the pics on the build thread will come up Anything is possible but it really would take some effort and dollars. The car was gutted out as much as possible for track. Cars kerb weight with fuel etc is at 940kg. Quote
Jk_zeder Posted September 24, 2013 Author Posted September 24, 2013 Thanks for the posts as well Matt and Richard. Quote
Jk_zeder Posted October 13, 2013 Author Posted October 13, 2013 Would like to get this out of the shed, hit me up for more details and get some offers coming my way Quote
dat2kman Posted November 19, 2013 Posted November 19, 2013 Decoy should look at this as a potential track car with his 3.4 litre Group 2B Sports Racing class thoughts. A cage, a logbook, it's a bit rough around the edges, and if it gets a bit belted up, ( can happen !) it's not a huge drama. Quote
Jk_zeder Posted November 19, 2013 Author Posted November 19, 2013 Not a bad idea Jason, he could throw the efi in the roady Quote
420BRB Posted January 9, 2014 Posted January 9, 2014 interested in swaps? + cash? or just sale? Quote
Jk_zeder Posted February 3, 2014 Author Posted February 3, 2014 Considering parting this out. If there is something specific you are interested in, sending me an EOI. James Quote
Jk_zeder Posted February 4, 2014 Author Posted February 4, 2014 Lots of interest coming through so please bare with me I'll get back to you asap. James Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.