Tony Mahonie

That’s me excluded then

I figured $, but how much?

What’s the usual donation?

Thanks Gav.

Far out! My brain has just popped. Glad I finally got round to conversing with people in the know. What’s the S and HS stand for anyway?

Hi Jack. Chasing this myself. So far, I think….?… your Z only optioned a compartment fan, but still searching for more info. C.A.F has his hands on HS30-00211, he would know more. You must have read the same article I did to call it Series 1.

Here’s the plates, and holes in the dash. Yep, 919 yellow from factory. I’ll add the hazard wiring to the dash wiring tidy up l’m completing now. I had no intermittent speed on the wipers when I purchased this Z, I changed it over to intermittent, then 2 more speeds. The colour got changed by the previous owners to diablo red I think. I Kept it diablo red. You can see it in the profile shot. Looks similar to sjcurtis post, on June 30, 2006. No writing near the glovebox. The dash was re-skinned before me in beige, then I dyed it back to black. Might be “abitza” Z, thanks for helping.

A bit of back ground. When I bought the Z, it didn’t have a choke, had a destroyed console, peeling door skins, L28 motor, no hazard switch, tons of little problems, and rust through out the body. I drove it for four years, then stripped it completely. That was 18 years ago. Now almost completed the rebuild. I have the drive line, and running gear all sorted. I’m searching for info about the option this Z had, like hazards, three speed wipers or two speed. Is there an Aussie site to find out where this Z was bought from originally? There is no log book or similar with this Z.

Thanks Gav. Any advise where to find the original specs this Z was built with?

This is just a reference another site used to tell the difference between the 240z badged 1/4s, with hatch vents, and the Z badged 1/4s, without hatch vents. I’ve read that this designed changed on June 1971. HS30-00866 (wrong number sent before).

The date on the plate is 6/71. This is the change over between the so called series 1 and series 2, or so I’ve read.

HS30-00899

Hello to all members. Long time 71 Zed owner, and finally getting close to completing the rebuild. After searching for info, I think my Z has been fitted with bits from other series of Z through out its life. I have two Z badges on the pillars, and no vents in the hatch, but has a 5 digit vin number? Is there any way to find out the exact factory build of my Z?