Jasonisa

he is based at Grays Point

I am getting a considerable amount of interior equipment for a 280zx sent to me in Alice springs, but apparently the freight company I am working through doesn't hire or give away pallets, and we have a pallet load worth of stuff including seats so boxes aren't really an option, does anyone in sydney know where you can find a decent pallet that he could use for the stuff? Any help much apreciated Cheers

Thanks Gav if I cant sort out something else i will look into it

If this is in the wrong section mod please fix, I am buying some parts of Cozza, mostly interior stuff for a 280zx inc seats and dash, but Cozza has no space to store them for much longer, I have no real contacts in Sydney, because I live in Alice Springs in the Northern Territory. I need more time to chase up freight quotes but don't have anywhere in Sydney to store the gear. So I'm looking for someone near Cozza (Greater Sydney Area) willing to store the stuff till I can arrange transport, OR Someone who has a contact in or is in the freight business and can help me get the stuff to Alice springs reasonably cheaply asap I know its alot to ask but I would be much appreciated if someone could help Cheers Jason

Retro Z what sort of price would you be after or do i need to go through the auction and postage to 0870 Alice Springs NT

Does any one know if these will fit a 280zx 5spd manual, or does anyone else have a suggestion on headers that will fit, P/s not looking for lots of extra power i just prefer the look and sound of extractors over the standard manifold http://www.ebay.com.au/itm/NISSAN-PATROL-HEADERS-EXTRACTORS-G60-MQ-1981-1987-L28-2-8lt-/252130471247?hash=item3ab425ad4f:m:mpS4R6gL3JvrP64p28DlF7g

Mick I have sent you a message and rang you, please contact me soon as I dont want to miss out on the interior trim Cheers

Hi Guys n Gals This may be the wrong area to post this but I figure it will get more noticed here in the general section, I want to hear from people who have installed Megasquirt in their Z i would like to know where did you get it from. I have used the search function with the words megasquirt and couldnt find anything specific to australia, Im not particularly confident with soldering so i would like to get hold of a Megasquirt I v2.2 ECU and loom already assembled So my questions are as follows 1. Is there someone willing to order the kit from DIY Autotune and put it together for me then send it to me 2. Or is there somewhere i can purchase the assembled units in australia 3. Or is there someone who has a MS1 V2.2 they are not using and would be willing to sell Cheers in advance for any help guys

Would you be keen to part with the dashboard and all the red plastic trim if I pay postage?

BTW I spoke to my local nissan dealer Parts dept and they said they cant get them, so even if there is some way to get a nissan one it would be good

Hi guys n gals, What's out there in the way of timing kits for l28e + l28et, need to know where to get one from and how much is usual to spend I prolly dont want to reuse the set up thats on the engine now, and have been told at this stage its best to get all new bits anyway Cheers

If Anyone has one of these Datsun/Nissan L series rebuild repair books spare im not fussed what condition as long as it is readable and you are prepared to send it express post, it would be greatly apreciated. cheers Jason P.S I looked on ebay and the only one there will not do express post

Hi Guys if I was to get a 240mm Flywheel and an RB Clutch, do I have to change my starter motor or any associated parts, or is the standard designed to to go with the 240mm Flywheel, Also is the Nissan 240mm Flywheel Standard across the board or do I have to get a 240mm Flywheel suited specifically to the 280zx, I apologise for all the Noob sounding questions but when it comes to anything to do with the gearbox or clutch im still learning, Cheers in advance to any help given

Hi JWalker590, What colour is the interior you are selling cheers

Wasn't sure where to put this post so someone let me know if its wrong. I have a 1980 280zx that i am putting an l28E+T setup in and i would like to know what is a cost effective HD clutch to use or will the standard item be able to handle a fair whack, car will be used for street and weekend drag racing fun (not serious competition) and running 10 to 12 psi maximum once its upgraded, Any advice much apreciated Cheers