Chipp

Thanks @AndBir I will check these out.

Hi Toby Thanks for the info. I didnt try Nissan as I tried the usual parts retailer (supercheap, Bursons, Repco etc). Who do you suggest as online resellers? Are any of them local as I am trying to get the dash reinstalled over Christmas holidays

HI When I bought my Orange 140z I noted that the heater core was bypassed I decided that when I have my dash out I would investigate fixing the heater. Now that I do I have noted that not only did the previous owner bypass the heater box they removed the Heater control valve and 3 hoses. I understand it could be difficult getting original hoses and heater control valve? Are there any local options for these or are there any other options for the hoses and Heater control valve that could be adapted under the dash? THanks in Advance Chipp

HI All While I had my dash out swapping in my reskined dash I thought I would check and repair all of my guages. I noted that my clock wasnt working. (Even in my second Zed). I undersand that most of the time they just need a clean and lubricate. I had a look inside but after investiagation it looks like one of the pendulums is missalligned as one end appears to be popped out of its mount. I have noted both of my clocks have the same problem. Iam after some advice on options to get these fixed and whether it is worth it? Thanks in advance Chipp

Neither hyuuuttr645 or theresa09 are members

I got on slightly varied one I have been contacted by hyuuuttr645

I got on slightly varied one I have been contacted by hyuuuttr645

While stripping my car down to prepare for body work I have sureprisingly found that my 240z drivers side door doesnt have a side intrusion bar inside. Does have anyone have a 240z door or side intrusion bar. The door doesnt need to be perfect I just the side intrusion bar. Thanks in Advance

Thanks anyway. I noticed you were after a 240z strut tower covers. I dont have any spare and if you cant find any I have mine off the car. If you are heading odwn this way I can get them out so you cant trace them.

Here is the photo of the RH one still on the car. and here is the photo of the broken housing (Passenger). You can see where the bolt has pulled through the bottom

My 240z front left indicator housing has broken where the bolt has broken through the bottom of the housing. Does anyone have one of these laying around they dont need for sale or know where I could obatin one? Also if I cant find one are there any other options like repros? Thank you in Advance

This was my thoughts.

At the moment they are only just bubbles, There is no rust holes that I can see. I was thinking to get them to check these areas look at the floors and rails (impact damage), repair the vinyl roof and dents repaired. My concern is that I would end up opening up Pandoras Box.

Thanks for the feedback. I definetly will get the repairer to use use a bucket load of internal frame coating to slowdown further rust development. For me I think is a better option than removing the sills and sand blasting.

Yes for me it is about the driving experience.