240Z_au

Hi Guys Quick sale..$1,150 for the 4 wheels. (These are the Type R I believe) Offset not known as I have lost the paperwork and had 3 sets at one point so not sure what is what. What I do know is: · There are 2 Brand New Wheels (the wider pair). Never put on a car and perfect in every sense. The distance from outside wheel mount to the front edge of the wheel is 115mm. The distance from the back of the wheel mount to the back outside edge of the wheel is 130mm (see pictures) · There are 2 Slightly Used Wheels (the narrower pair, I had them on for one 50-100km drive and decided the look wasn’t right) The distance from outside wheel mount to the front edge of the wheel is 90mm. The distance from the back of the wheel mount to the back outside edge of the wheel is 115mm (see pictures) Wheels are undamaged and seen in the picture..$1150 for the lot (4 wheels). Pickup in Sydney’s Hills District or I can deliver in Sydney for about $100 via currier. Can ship interstate, but you organise the pickup please. Feel free to call me Andrew - 0405 796 942 - Will go up on Ebay next week if no interest. Cheers.

OK, so Yellow car is progressing slowly overseas, hope to have it back here before the end of the year.

G'Day..So was out of OZ for almost 2 years and just arrived here for the next 3 weeks and couldn't wait to finally (after 3 years since I got it made) to place my bits and pieces inside the car and kind of finish up the interior. Took her for a drive and a big grin on a face (same about the speed limits and roads here, but we cant have it all)

While living abroad, I get to meet a buch of interesting people. This guy in Europe had a massive 240z Tatt done on his arm. The guy is in his mid 30's and had his S30 for the last 4 years. He said that the car had changed Many things in his life (positive) and he felt compelled to have this tatt done to eternalise his love for the car. Has anyone here, or anyone you know done something similar? - How deep is your love for the S30 Happy Snapping. Andrew.

Bump...Any punters out there without silly offers?. Engine just loosened up, reconditioned Japanese carbs, new clutch, light flywheel, all new, the whole lot, ready to be transplanted without build headaches and dissipointments. You can see/hear/feel what you are buying... Almost 200Hp on a dyno at SWM in Sydney, this was just after the engine was installed and was not fully run in. I'd expect this number to be at least 200Hp now. Stewart from SWM says the car needs a different cam to get a bit more power, but I dont want to muck about for small gains. Over to you gents.

Thanks a Lot for this. would love to, but so tied up over Easter, hard to manage weekends right now. I would be going with ITB's, but still on a fence about the RB swap after several discussions. It seems I'm not fully ready to let go of the L series. Either way, My engine does need to go.

Two of the best six's ever made.

Here are the links for the Engine running / detail. Cheers.

Doing N/A twin cam RB engine..I believe 30 bottom and 25 top. .I'm early stages so I have no answers to who?, what? and how?. I will post in my build link as soon as things get moving..Cheers guys. BTW..Love your work Kato - My goal is to give you a run when I'm done

I'm struggling with video....

Thanks for the messages guys..1st with $, best dressed..I will post video of engine running and detailed close up's..for the few that have been asking..Hopefully tonight...Thank you,.

If brand new, I'll take them.

Thanks..Not sure whether that will work and I'd like to stay with Recaro parts. I'm waiting on an answer from the other place suggested earlier. Thanks anyway, much appreciated.

Thanks a lot guys..I'll check the suggestions, don't want to fabricate stuff when they are available. The standard brackets may not marry up with the S30 recaro rails, but I'll give racerindustries a go. Thanks again!

Thanks guys... If anyone has any links to brand new 50's with manifold being sold, anywhere in the world, let me know please. I want to buy them all and have a monopoly on Mikunis

Hi I've decided to do an engine swap and will no longer require my current engine setup. Selling a complete lot, not separating anything. In addition to the attached list, the engine has a high speed starter motor (new) and a reconditioned alternator. In the sale I will also include full exhaust system as documented in my build. Picture of the engine built attached. Engine serviced 3 weeks ago and under 1000 miles in total over the last 4 years or so.. (essentially just rune in). No oil leaks, no seeps, nothing to do.. Engine will be in the car available for inspection until sold. $9,500. Thank you. Andrew

Thanks! - I had it made...Its not available for sale anywhere.

Guys...Need some assistance here please.. So I have my Recaro Pole Position and the rails as described above. All good, BUT...Missing the side metal brackets which come separately..No one in Australia has any ideas, the so called Recaro specialists and "sales people" tell me to look up their web shop - right.. So I have Pole Position Seats + Base Frame with rails...I'm missing the 4 plates (Left and Right) to marry up with the seats (that's the easy part) AND the base frames as per attached part numbers for the S30 (the hard part) Anyone with part numbers out there has used these before? - Any help MUCH Appreciated..... Thank you.

The centre console finally done...

Hi Guys...Sorry, have been under the hammer and the Yellow Z hadn't moved much at all..Taking off rotisserie next week to return to Peter. ...Looks like ti wont be finished till next year now...

Hi...I have Brand New 50mm Mikunis, with mikuni manifold, linkages and stacks. Asking $7,500 for the set. (these are brand new, never used). Ping me if interested. I have 2 sets left for anyone else that may be interested. Thank you.

Hi Guys.. The Carbs are No Longer available.. Cheers

Yep, thanks for the tip...I'll fix it..Speaking 3 languages doesnt help

Cheers guys...Have an offer via ebay for $3K + shipping... Happy to let go at that level with Velocity stacks included (brand new, unused, full billet) PS. Tuning may be out slightly for a different engine, but it will be 95% there with few tweaks it will work perfectly on any L setup, so money not all wasted Thank you

Thanks for the input..What is the "cheaper side"?..Dont worry, I wont cry I just saw people paying $2,500 for Spanish Webbers, maybe someone will see value as I did for what I consider, much better and sorted Mikunis (full rebuilt done less than 2000 km's ago).. Anyway Gents, open to offers..They need to go..I have a new set on the way from Japan 45mm and Stewart will be tweaking these for me soon with a better cam etc..