Jump to content

ratzcar

Members
  • Posts

    12
  • Joined

  • Last visited

    Never

About ratzcar

ratzcar's Achievements

Newbie

Newbie (1/14)

0

Reputation

  1. hi just asking the motor in my z was out of a 260c it was manual four speed not auto i converted it to auto now years later i have all the parts to convert to manual 5 speed the crank has a larger end and longer not like the 260z motor have lost the 260c flywheel have lots to do with datsuns over the years but never seen a larger end on a Nissan crank like this what other datsun flywheels have this larger end regards
  2. hi thanks for that but finding a old 260c or skyline with ac is more rare than a 260z can i use a diffrent 3 pin ac relay cut the plug off regards
  3. need help i am after parts for my Zs aircon got most of the parts the parts need is fast idle actuator air con relay( next to the water bottle ) if any one has them parts for sale i need them to get my aircon working regards Brendon
  4. hi mark try mick at police point sent me a your email and i will give you his number regard brendon
  5. hi can you send me a copy of the wiring for the efi motor and what is needed to change to run efi if you can hep i will apreciate ti regards brendon :)
  6. hi all yes 2 260z 2+2 in howrah 1 dark green and a rusty silver 2+2 one owner in a shed up the road from me and mine is finally in paint now get it back to gether before summer
  7. hi all it's the front indicators i need and only the backs i have new lens parts went to find the backs to restore can't find them i lost them in the house move hope some one can help out
  8. hi all thanks for help in the past i need the left and right backs of the indacators i got the lens parts all well as the intacator in the car as well needed best regards brendon
  9. thanks do you use a modified seal or standard nissan i will use hylux calipers but extend the connecting points or is there other calipers i can use? sorry for the late reply been busy at work but today my car came to life started after 2 years all my wiring done and it started first pop regards
  10. hi all i need info on ford xd-xf disks for a 260z have done a r31 rear disk setup on my z the disks i have are a hub type i am using 17 inch multi fit rims so 5 stud on the front is OK what bearings do i use and what other things do i need thanks if you can help
  11. hi all i can beat that there are 2 260z 2+2 in my street in howrah mine and and a one owner from new both 11/ month 1975 have seen a dark green 2+2 but rusty at shoreline as well hope that helps ratzcar
  12. hi all no your not the only one ratzcar howrah hobart tas i have been busy at work but got so time off so i restarted work on my 260z 2+2 all most ready to respray and get back on the road pics soon regards
×
×
  • Create New...