chartoo Posted August 21, 2012 Posted August 21, 2012 Hey all. Can get my hands on a set of series 8 seats for a good price. Some write ups show them really easy to install and others I have seen ppl start cutting away the floor rails. Can any one confirm how hard it is for these seats into my 260z 2 seater? Quote
Retro Z Posted August 21, 2012 Posted August 21, 2012 If the rails are the same as a rx8 then it will be bolt in, with no mods to floor. I got rx8 series 1 seats in my car and only required 2 peices of flat steel and a few bolts to get it fitted. Most seats ive come across can be modded in the same way providing the rails arent too wide apart or uneven in height. Quote
nizm0zed Posted August 21, 2012 Posted August 21, 2012 please pleas PLEASE take lots of photos!!! Im going to get the same seats and put them in my car too, more pics are allways a good thing. From what i have seen/read it seems to be a very easy conversion and a well fitting seat. Quote
Administrators gav240z Posted August 21, 2012 Administrators Posted August 21, 2012 I think it's the same as MX-5 seats in terms of fitting so if you can find more info on MX-5 seats that might help? Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.