Need a cut from 260z 2+2 to replace rusty section....

[Shan]

Hi Guys,

 

My mate is helping me with some of the rust in my Z.  Looks like I need part of a chassis to replace a rusty section. 

Apparently could be easier to cut one out of another car rather than fabricate.

 

So - what I need is the following (a bit hard to explain - will do my best):

 

Passenger side.  Base of front windscreen pillar. 

The dog-leg at bottom where windscreen pillar meets left hand front of engine bay.

 

Essentially need to cut out the bottom of windscreen pillar - right up near where to passenger door hinge is.

 

Can anyone accomodate this?  Let me know.

 

FYI - I re-used a picture from forums (hope that is ok) - circling the section I need. 

Just imagine that the door and front panel are removed - that is the section I am looking for!

 

Cheers.

Shan

[C.A.R.]

I have that section Shan - call me.

[MaygZ]

Me too.  Don't call Lurch.  Call me.  Call me now ......

 

MaygZ

[Shan]

Thanks maygz (and Lurch)

Will let you know as soon as I can about this section also.

Cheers.