rb20/rb30 gearboxes and close ratio gear sets -Brisbane

[dat2kman]

Have some rb20/rb30 Nissan 71c  complete stock gearboxes avail, can supply with RB type bellhousings, or can swap over  YOUR L or FJ series bell housing over onto the stronger RB gear sets.

Can also supply thicker close ratio gearsets for these RB type gear clusters ( 71C ), as well as L series gear cluster ( 71B) Can also offer supply AND fit/reco gearbox with modified set up to your bellhousing.

 

Close ratios are similar to Nismo Option 2 - first/second/third gears

pm or ring me on

0403 071 294

 

 

 

[260Devil]

Ok to start off i have a l26. Secondly how much just for the stronger rb box? i dont think i need the short ratios its just a daily. Thirdly do i need to rebalance/shorten the drive shaft? and would i need to change the diff ratios?

alot of questions i know

Thanks.

Aaron.

[dat2kman]

RB20/30 box are same overall length as a stock L series box from a 260/280 z, so you keep your stock tailshaft, which is good. No need to rebalance tailshaft!

Just a box? price is $400 for a RB complete box.

To make it fit into a Z I will need you to supply your old L series B type box, or get one from an old Bluebird or 240k/Skyline etc that has a L motor 4 speed or 5 speed it must be, I just can't do it to an Auto Box !!.

I then machine and make the L bell  fit into the RB cluster , I  bolt it on and you bolt it in.

 

You will need to mod the box xmember, i will show you what and how ( very simple !). For that i charge some dollars/beers/bottles of nice stuff etc for labour and machine milling and lathework and imparting knowledge and wisdom.

 

Depending on what you want to do with the car, if used as a daily driver and nice long drives, you do not need to cahnge your diff. if you want to play weekend warrior and do some sprints/trackwork, I suggest you ugrade to say a 4.3 LSD diff, which I can supply, and if budget stretches, consider a nice brand new close ratio gearset for the RB box.

No question is too difficult!

hope this helps!

jason

[260Devil]

wow thankyou and yes i believe some beers would be in order for such a job haha

and as im just starting off modifying my Z ive been hearing alot of things but what is an r200 driff?

[peter t]

Does the rb20/30 box fit a 2+2 with no problems as to the location of gear lever placement? 

[PZG302]

Should do Pete. Jason is traipsing around Europe for a bit and will be back late July to be able to.confirm if it will work in a station wagon but as they are pretty much the same in terms of engine and gearbox location mounts with the 2 seaters should all be good.

 

Matt

[stevofoxono]

awesome, should have some tax coin back by then