neutral/park switch help required

[gx1200]

Hi guys, this has probably been covered before but I cant find info that im looking for. I have a 77 260z auto (converting to manual). which wires do I bridge for the neutral park switch and where are they located? my car was pulled apart 12 years ago  so we have all these unplugged wires everywhere. help much appreciated

[PB260Z]

Hi

Bridge the wires for starter interlock, these are among a group of 4 bullet connectors in the engine bay near the firewall on the right hand side sort if below the clutch master cylinder (2 are kickdown & 2 two are interlock) in my car the starter interlock were Black with a Yellow trace. The kickdown wires can be left as is.

Cheers

PB

[AndBir]

As PB mentioned, the Black-yellow stripe wires are for the interlock switch.

[gx1200]

thanks guys, I will give it a try in the morning.the wiring diagram above is completely different to what I have found (3 different books). cheers for the advice.

Adam

[AndBir]

11 hours ago, gx1200 said:

wiring diagram above is completely different to what I have found

It is from the Nissan Service bulletin Vol.197 which outlines the changes from the 240Z introduced in the 260Z - so they may have made some more by 1977. Here is the engine bay wiring loom diagram - may or may not help you.