PeterH Posted May 22, 2018 Posted May 22, 2018 (edited) The mirror stem will most likely be of more interest than the turn signal housings. I've posted before and after photos ..the mirror stem was in a particularly bad state after some one else had a go at it and left a hole in it http://www.aclassmetal.com.au/ https://www.facebook.com/pages/A-Class-Metal-Finishers/133288193385505 I won't post the cost on here because it can vary a lot depending on the original condition. I sent some photos and they offered a best and worst price to me and it came to a bit above half way. They did about four different processes in the job. Strip and polish, repair and fill and a couple of plating processes. There must be a lot of mirrors out there that would benefit from the process. Hope this is of interest Peter Edited May 22, 2018 by PeterH GongZ, RAP260, gav240z and 1 other 4 Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.