redzee Posted March 27, 2017 Posted March 27, 2017 (edited) I am after the driver side retractable seat belt complete with stork and associated parts working or not. It appears that I will not need all bits as I am looking at replacement. However I would like to use the metal guide bar in the new seat belt makeup so I need the drivers side metal guide if any one has one and that should get me out of trouble. Edited March 29, 2017 by redzee Quote
gilltech Posted March 27, 2017 Posted March 27, 2017 Might pay to post a photo of what you're wanting to match, as there are different seat belt set-ups across Zeds whether Aus-new or from elsewhere. Quote
redzee Posted March 27, 2017 Author Posted March 27, 2017 Well I have taken some pics and the description of the set up is the retractable unit is bolted to the top of the rear strut on a bracket. The belt is fed through loop in a metal bracket that is bolted to the roof and under the side window. Then it is secured to the floor behind the seat. To fasten the belt it is drawn across the torso and fastened to a stork that is bolted to the transmission tunnel. Quote
gilltech Posted March 27, 2017 Posted March 27, 2017 It's the location of the retractor which is key, some were fixed lower on the wheel arch, some on the strut, the internals can differ depending on the belt angles. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.