theremm Posted March 3, 2015 Posted March 3, 2015 Hi, Searching for a complete speedo gear (white, 19 tooth) and sleeve to match a 3.9 diff. Anyone have a spare lying around? Also chasing the following.. can purchase from USA but thought to check if anything locally first! - rubber shift boot that sits at bottom of gear stick - dust boot and bezel that mounts to tunnel - clutch fork boot (71B) - shift pin bushing and clip set - transmission breather Part way through auto to manual conversion. Cheers 73' 240z Quote
dat2kman Posted March 4, 2015 Posted March 4, 2015 Just gone through the ten or so here, sorry, no white 19 tooth ones, lots of other colours/counts! Foe the gearstick bushes i can machine up steel ones, but these are on a made to measure/fit basis, from bar stock. Require the pin and gearstick to do it. Got old rubber boots, but they are,,, old,, and gone hard/ torn For a trans breather, I can tap a thread into it ( mst be no oil inside- need to hold it upside down) and fit a screw in brass NPT elbow nipple and you run a bit of hose up from it. Quote
theremm Posted March 4, 2015 Author Posted March 4, 2015 Just gone through the ten or so here, sorry, no white 19 tooth ones, lots of other colours/counts! Foe the gearstick bushes i can machine up steel ones, but these are on a made to measure/fit basis, from bar stock. Require the pin and gearstick to do it. Got old rubber boots, but they are,,, old,, and gone hard/ torn For a trans breather, I can tap a thread into it ( mst be no oil inside- need to hold it upside down) and fit a screw in brass NPT elbow nipple and you run a bit of hose up from it. Bummer! Thanks anyway mate. I'll just go ahead and purchase all through z store or somewhere similar and get it all over in one go. Cheers Quote
dat2kman Posted March 4, 2015 Posted March 4, 2015 Have a look at MotorSport Auto, in US, they have a fair bit of stock. Quote
d3c0y Posted March 5, 2015 Posted March 5, 2015 Pretty sure i will have a 3.9 pinion out in the garage Quote
theremm Posted March 5, 2015 Author Posted March 5, 2015 Pretty sure i will have a 3.9 pinion out in the garage Would you have the complete set, i.e. 3.9 pinion, retaining pin, and sleeve that fastens to the gearbox? Quote
d3c0y Posted March 5, 2015 Posted March 5, 2015 No sorry used it for my gearbox, so i just have the pinion. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.