Dan260Z Posted May 7, 2013 Posted May 7, 2013 G'day, after a set of lowered springs for my 260z 2+2, specifically part numbers KDFL-04 and KDRS-09... (note 240z low's are different) I also have a set of new, stock height springs for sale if someone were raising their ride back to stock or replacing sagging originals... http://www.ebay.com.au/itm/130900127076?ssPageName=STRK:MESELX:IT&_trksid=p3984.m1555.l2649#ht_591wt_1405 And i'd be willing to swap these directly for a decent set of low's... Quote
peter t Posted May 7, 2013 Posted May 7, 2013 Damm, I just bought a new set of standard King springs for my car. Have a set of the lowered ones still in the car if you are not in a hurry. Be aware though they will drop the car below the 100mm legal limit. My low set are only about 18 months or so old. Quote
Dan260Z Posted May 7, 2013 Author Posted May 7, 2013 Bugger - if only I'd got off my butt and try to sell them earlier! Had them since 2007 when I bought the car. Definitely no hurry - years left on the build. Which type/brand of lows were they if you don't mind me asking? I didn't think king lows would drop it that far... Quote
peter t Posted May 9, 2013 Posted May 9, 2013 They are the standard King low springs for a 2+2. Only been in for about 18 Months or so. I replaced rails with ones that a sheet metal place made for me and the rails may sit a bit lower than originals. Driver side is lower as the fuel and brake lines run along side rail. As I said if you are not in a hurry, I will give you a shout when I get them out. Quote
Dan260Z Posted May 9, 2013 Author Posted May 9, 2013 Cool. I spose worst case I'll engineer and register mine with the original stock springs then fit the lows. Cool no hurry - PM me whenever you get them out and we go from there. Let me know also what you'd want for them and where you are too please. Quote
Bobby Birdi Posted May 16, 2013 Posted May 16, 2013 Hi Guys, I have a 1973 240z with lowered King springs Front - KDFL-08 Rear - KDRL-09 Don't like the car lowered, would love to get it back on standard springs. Its a shame we can't do a swap..... Quote
Dan260Z Posted May 8, 2014 Author Posted May 8, 2014 **Bump** Still chasing some low springs for my 260z, open to suggestions when it comes to brand, etc. Even better if you can vouch for them actually lowering a 260z 2+2 and generally fitting well (non captive should be ok though as I have slightly shorter sectioned struts). I only know the King springs references for 260z lows, in case these help: KDFL-04 260Z Front KDRS-09 Low 260z Rear Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.