borboyous

Hi Guys! Following on from my parts listings a little while back, I now finally have my 260z 2+2 on ebay. There are a ton of pictures from almost every angle! Please feel free to have a look : http://cgi.ebay.com.au/ws/eBayISAPI.dll?ViewItem&item=250715707468&ssPageName=STRK:MESELX:IT If you have any questions etc please feel free to PM me. Kind regards Craig

Thanks Alan

BUMP!

Hey guys, Here is a pair of Hilux twin piston calipers to fit your Z car, they are marked with 12+8 on the body of each caliper ( see pictures ) and will need some refurbishment before being used. Im looking for $150ono I just need these items gone so open to offers please! ( I'm really not sure what they are worth! ) for the pair and I think postage would probably be around the $15 mark due to their weight. Please feel free to PM me with any offers Kind regards Craig

Sorry Brianz pm'd me first for the bushes - so they are provisionally sold to him awaiting payment, if this falls through then you have first choice! Sexual Sushi and chris240 you both have pm

Hi there! Here are a couple of items from my incomplete build which I am looking to sell. First up is a brand new Energy Suspension 'Master system' full set of bushes for the 74-78 260z/280z inc 2+2. I will include the original invoice (over $350) to cover any warranty issues. This is a brand new item - I am looking for $250 $225ono Next up is a set of King Springs lowering springs, again these are brand new and still boxed. Im looking for $200 $180ono for these. Please PM me if you are interested - thanks!

Hi guys! First off - thanks so much for all the messages I have received with offers of support, it is all totally unexpected and very kind! The situation isn't desperate but I am trying to put on my 'sensible trousers' and do the right thing for us to move forward. Also thanks for all the help with trying to ID these flares, I have never been sure where they came from but loved them because they look similar to Mark Rolston's flares he has on his amazing 240z which I'm sure you will have all seen! There are a few interested parties on this forum and it would be good to see them used on a project car from here so that I can see how they look on a Z. Does anyone have any ideas on the value of these items? I truly have no idea what they may be worth and could really use the advice of someone who has a little more knowledge than me! Also, could some advise me whether it would be better to sell my 2+2 as a complete (albeit unfinished) package or to sell it as parts only? I am a little confused about how best to proceed! Thanks again guys! Craig

Hi Garvice, I have a full 260z 2+2 which is mostly stripped but still drives, a ford 302 v8 fuel injected motor and 5 speed gearbox. A brand new set of lowering springs, new full set of uprated bushes, hilux calipers, the flares and boot spoiler and a weld in panel for the boot close, I'm sure theres probably more but I cant think what there is right now - I probably should take pictures etc to jog my memory. The car was my daily driver and was registered until march of this year. It has rust in the outer sills and in the spare wheel well, also under the passenger side rear window but I have a piece to replace this from another car. The car is a fantastic project basis which I intended to go the v8 route with, but sadly its not meant to be!

Thanks for the input Lurch! RB - I really have no idea on how much these items are worth, which is why I am considering the ebay route to sell them, we need all the $$ we can get right now please feel free to pm me with a price and I will get back to you

Hi there! I have a set of fender flares that I bought a little while ago with the intention of adapting to fit my 2+2, I liked them because they reminded me of the flares that are fitted on Mark Rolston's 240z. Unfortunately, my partner has received some bad news health-wise and I must now sell my project incomplete and all the parts I had bought to complete it. I was hoping that someone on the forum may know what these flares are and perhaps where they originally came from so that I may list them on ebay with all the correct information. They have some old markings on them written with a nikko that simply identifies them as for a 240z. They add 100mm (4 inches in old money!) of width per side when fitted. Sorry about the photo quality - they were taken on a phone camera! I also have this boot spoiler - I believe its shape is referred to as a 'BRE' spoiler but perhaps someone could confirm this? It has the shape of the rear hatch lock cut out and is about 4 1/2" tall. Thanks again!

Hey guys! I am currently in the middle of restoring my suspension on my 2+2 and read this thread before attempting it - it's bloody helpful! I have a question though! It turns out my car has the original 'wet legs' so I have taken them apart to replace fluid etc, however, it turns out that one of my front 'legs' has been running dry for a while by the looks of things, there is wear on the bush and shaft (see pics) and the seal on the top has worn as a result (probably the reason for it being dry - see pic). I was wondering if there is a rebuild kit available for these items? Are the bushes and seals still available from anywhere? I know it's a big ask but I can only hope!

Thanks mate - I will look into it, thanks for the info!

Hey guys! I have recently bought the r31 rear brake kit and a set of ln55 front calipers for my zed to beef up the brakes before I shoehorn my 302 Windsor motor in, I'm looking for the bigger master cylinder so that my brake upgrade is complete and was wondering if anyone had one lying around that I could buy? I have $$$ waiting! Craig

Sorry to dig up an old thread but.......... I'm looking to replace the bushes in my 2+2 and was wondering if anyone could recommend where to get them from? I would be really grateful! Craig

So if my 260 has an R200 does that mean it is an LSD or not? Sorry, not very good with the tec stuff - still a noob lol

Those are my keepers! I'm gonna modify them to make them look like Mark Rolston's flares, if I can find someone to make a plug with them I wanna make some copies so that other people can have some too!

Hi! they are fibreglass - thanks!

Hey guys! Now I have sold my 2nd Z I have been pulling out some of the parts I have accumulated over the last couple of years and amongst them is a set of flared wheelarch extensions. They have been used (not by me!) and require a little tlc to make perfect again but definitely give the Z a beefy profile! I'm not sure what make or what sort of flares they are or how old they might be, they are surplus to requirements and I'm after about $200-250 for the set or PM your best offer as I really dont have any idea on value of them to be honest Lots of pics can be found here - http://s776.photobucket.com/albums/yy45/borboyous/Z%20flares/

I now have the piece I need for my car! Many thanks to peter (peter t) for your help! I will be making a donation to the site on your behalf as agreed fella! Craig.

Email sent - thanks!

Hey guys - I'm in Redcliffe on Brisbane's north side, I have a brown 2+2 (for sale on here) and a red 2+2 thats my keeper! Craig

Mate that would be so fantastic! How much do you want and do you have somewhere I can plug a grinder in? I'm available everyday except sunday - when could I come over? Craig

My car - http://cgi.ebay.com.au/ws/eBayISAPI.dll?ViewItem&item=250488890013&ssPageName=STRK:MESELX:IT

Can you tell what the condition of this piece is like? If it is pretty good please pm me a price.

Now on Ebay too - 10 day listing. I would prefer to sell to an enthusiast from here though! http://cgi.ebay.com.au/ws/eBayISAPI.dll?ViewItem&item=250488890013&ssPageName=STRK:MESELX:IT After chatting to a moderator I've decided I'm looking for an 'absolute minimum' of $1500 which I think is pretty good value and leaves plenty of room for the cost of transportation if necessary! I'm happy to hold the car for a club member while transport is arranged and I will of course be available for collection of the vehicle whether by a shipping company like backloads.com or for you in person. So come on! Who wants it?