zzzzed
-
Posts
2,697 -
Joined
-
Last visited
-
Days Won
5
Content Type
Profiles
Forums
Gallery
Events
Articles
Media Demo
S30z Register
Store
Everything posted by zzzzed
-
i cant do you the throttle body linkage bit the rest is no probs
-
so you need all the plastic ball caps and plastic bushes from the throttle body to the fire wall Is that correct? It also seems that the throttle body ball caps are the same as the ones on the su carbs
-
hey lurch pm me your postal address and i will post you some good ones I have a few sets spare
-
yep the ones that look like a broken drill bit
-
i have one at work also. personally i like the old type better
-
i think the power window pack should fit withj no drama I think i can get this to work even if i have to cut and shut the scissor arms to get them the right length
-
My drivers side window mechanism is well worn and needs replacing I was playing around with a vs commodore window at work the other week and i thought "Hey that mechanism looks familiar" so i stole it and took it home for a comparison "i hope that customer dosnt wind down his passanger window :?" check out the right one in the pic is from my 240z and the left is commodore
-
nah!! he needs a china mans hat and then he can start his own taxi service
-
you could get away with out an intercooler but i would prob fit one down the track just to be safe
-
yep been there done that and the roof ended up on a datsun 1500 ute paddock hacker
-
there dose not have to be oil in water or vis versa to have a blown head gasket. it could be blown between two cylinders for the turbo the main two mods will be water and oil lines to the turbo. You will only beable to run about 5 or 6 psi on standard ecu, injectors and fuel pump or you will blow holes in your pistons from leaning out to much
-
to do a turbo you will have to take the sump off and have an oil return line welded in to the sump for the oil return line from the turbo. with your engine problem have you considered it may be a burned or sticky valve or maybe a blown head gasket
-
My worst fear realised.....Opinions or ideas needed.
zzzzed replied to zedrally's topic in General Discussions
geeezz our panel shop dosnt charge enough.. we would do it for a about $2000 -
hey there
-
there is an easy fix to that problem. the problem was with the crapy oem injectors. If you swap them with injectors from a rb30 then your problems will be solvered. I have vl turbo injectors in mine
-
for that price it would have to be a mass money pit
-
i just went through my ebay history. yes that was them the rest fits fine though
-
i got mine from ebay but i cant remeber who the seller was
-
i have the same problem so i will be interested to see others opinions on this. I have just clamped it down any way for the time being until i can find something that actually fits
-
Right on John
-
good luck buddy
-
same as the one in gavs link but for $5000 http://www.auz31club.com/viewtopic.php?f=39&t=182 and a couple of others this one is very tidy http://www.auz31club.com/viewtopic.php?f=39&t=446 http://www.auz31club.com/viewtopic.php?f=39&t=286
-
try www.auz31club.com i think there is a couple on there for sale
-
just basic cross measurements from factory bolt holes on the bulk head to the strut towers. I only used a tape measure, but when i get it to work i will use a Tremal gauge
-
I dont want you all to think i am slacking off so i shall show you were i am up to. I have fitted all the panels to the car so to see how they fit.. I have fond that the front end is out of square by about 5 mm so i am going to take it to work in the next few weeks to put it on the rack. I am just waiting for a guy to come pick up his car from work so i have the room In the mean time i shall be getting the removable panels ready for primer There will be more youtube in a couple of days
