240Z front struts with coil over sleeves installed (FREE POST to Melbourne)

These ones were on my 240Z when I bought it.

I have recently swapped them out to put another set in that I had made as these ones could give me a lower front height. I was planning on grinding off the weld holding the sleeve on and welding it on a little lower, but since I'm going to sell them I thought I would ask first to see if anyone is interested in them as is, or if you'd like to buy them after they've been lowered a little more. Some may even want to section them if installing shorter strut inserts.

As is, the front can still be lowered a lot more than factory ride height. My opinion is that there is just a bit of wasted space on the threaded sleeve which reduces how much you can lower it by.

The springs that come these are 225lb or 4kg and they take factory length strut inserts (not included).

They will come as in pic (ones on the left) but with the blue top hat obviously.

Price will be dependant on if I modify them or not so let me know if you are interested.

cheers

Free bump that car is going to be nuts.

Thank you for bumping my add which was 4mins old and already at the top of the list 

PM Sent

I am selling a rear set as well, but without the spring tops or springs, coilovers all round for cheap

Sorry to hijack the thread but it might help you sell yours too

Thank you for bumping my add which was 4mins old and already at the top of the list 

lol 

I am selling a rear set as well, but without the spring tops or springs, coilovers all round for cheap

 

Sorry to hijack the thread but it might help you sell yours too

There you go guys, coil overs all round for very cheap.

I'm thinking $350 for mine unmodified, as thats how most of the people who contacted me wished to buy them.

cheers

Tim

I am leaving for Melbourne on Thursday and I could put these in my luggage if someone in Melbourne wanted them minus the cost of postage.

Let me know asap.