RB30X Posted December 16, 2009 Share Posted December 16, 2009 Ok, I have the following ZED stuff for sale to clean out my shed. The strut assemblies would be good for someone doing a coil over sleeve conversion. 280ZX 4 x Front strut assemblies (55m tube) Front control arms 4 x Rear strut assemblies (51mm tube??) Rear control arms R200 from a manual 280ZX with 3.7:1 gears CV Half shafts to suit R200 Two 280ZX bonnets in good condition 2 x Center drive shafts to suit a manual box 2 x Headlamp surrounds 260Z 2+2 1 x Bonnet (comes with free rust) 2 x Front strut assemblies (55m tube) Front control arms Rear strut assemblies (55mm tube) Rear control arms Rear drums Steering rack Brake booster LH RH 2+2 quarter glass sections including stainless trims Fuel tank Moustache bar Front calipers Long steel vent that goes between dash and windscreen 2 x front guards 2 x head lamp surrounds (still attached to the guards) 2 x head lamp buckets (still attached to the headlamps, inside the surrounds attached to the guards ) That's it for now unless I find some more stuff. I have a rough idea on what I want for some of the items but taking offers mostly. Cheers Quote Link to comment Share on other sites More sharing options...
OZ001 Posted December 16, 2009 Share Posted December 16, 2009 how much for r200? Quote Link to comment Share on other sites More sharing options...
RB30X Posted December 16, 2009 Author Share Posted December 16, 2009 $300 for the 280ZX R200, I also have an R200 and shafts from the 260Z but probably should hold onto that one. cheers Quote Link to comment Share on other sites More sharing options...
Mr240z Posted December 16, 2009 Share Posted December 16, 2009 Are the 260z 2+2 rear control arms the same as a 240z... Question for Lurch or someone that knows, As tim's not sure. Quote Link to comment Share on other sites More sharing options...
RB30X Posted December 17, 2009 Author Share Posted December 17, 2009 I can measure them vs my 240Z ones if you want mate. Quote Link to comment Share on other sites More sharing options...
RB30X Posted December 17, 2009 Author Share Posted December 17, 2009 Measured just then. A = including nut heads 550mm B = 405mm C = 220mm These are measurements from a 260Z, Mr240Z can you compare these to your 240Z's as they are obvioulsy out and easlily accessable. cheers Quote Link to comment Share on other sites More sharing options...
Mr240z Posted December 17, 2009 Share Posted December 17, 2009 Thanks Tim, First thing in the morning.....Way to hot for cars atm. Quote Link to comment Share on other sites More sharing options...
RB30X Posted December 17, 2009 Author Share Posted December 17, 2009 WTF, You live in Sydney? I'm like a kilometer from the equator in humidity central, I start sweating when I walk out of my air conditioned bed room at 4:30am?? Here are some pics of the front calipers for those who asked. If you need pics of anything else let me know. Quote Link to comment Share on other sites More sharing options...
dats right Posted January 19, 2010 Share Posted January 19, 2010 hey mate just wonderin if you still have the 280zx cv shafts an how much you would want for em? any chance you have the champion flanges they blot up to an how for much them as well cheers luke Quote Link to comment Share on other sites More sharing options...
RB30X Posted January 19, 2010 Author Share Posted January 19, 2010 Sure do mate, PM replied. Quote Link to comment Share on other sites More sharing options...
Moderators Zedman240® Posted January 19, 2010 Moderators Share Posted January 19, 2010 How much would you want for the guards/nose cones L+R? Thanks Quote Link to comment Share on other sites More sharing options...
RB30X Posted January 19, 2010 Author Share Posted January 19, 2010 Sold and sold sorry, just recently too. Quote Link to comment Share on other sites More sharing options...
sco_aus Posted January 20, 2010 Share Posted January 20, 2010 Brake booster condition and price please mate? Quote Link to comment Share on other sites More sharing options...
RB30X Posted January 20, 2010 Author Share Posted January 20, 2010 Just sold it on ebay mate due to lack of interest here. Quote Link to comment Share on other sites More sharing options...
sco_aus Posted January 20, 2010 Share Posted January 20, 2010 Fair enough, there were so many parts sales on here I lost track of which ones were which lol Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.