lethalw Posted October 20, 2009 Posted October 20, 2009 Chasing four l24 conrods w/-9mm bolts for a small project. Anyone have any left over after a stroker project? ... Ok I'll fess up, Its a Ford Escort with a hybrid bottom end and a Lotus head, It will have a Datsun 1800 crank and the 133mm long rods if I can find a set. Thanks & cheers Lethal Quote
240ZR Posted October 20, 2009 Posted October 20, 2009 Yep, I have a set here in Wollongong. Nick... Ph 0416 283 194. Quote
dat2kman Posted October 23, 2009 Posted October 23, 2009 1 set of six here in Brisbane, fitted with ARP bolts. sell as full set ( 2 spares!) L24 133mm gudgeons are 22mm ( I was using Isuzu G200 87mm diam pistons with 40 thou off the top to get correct pin height and a flat top slug - works well) You are probably using a L16 crank, most other Escort performance engines do, only 'cos ( not cosworth) Datsuns are better!!!!!!!! Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.